|
![]() |
#1 |
Member
Join Date: Mar 2016
Location: Crete, IL
Posts: 167
Likes: 214
Liked 56 Times in 24 Posts
|
![]()
Has anyone experience with wiring the late model Challenger door glass with the smart controllers. The 09-11 Drag Paks have specific controllers that wired different from stock to control the electric windows. Those controllers are no longer available, as I've been told. I tried wiring the OEM controllers the same as the DP, but do not operate.
I have been sifting through schematics trying to piece it all together, but thought I'd ask if anyone has experience in this that may give me a short cut. Thanks
__________________
Todd Gross 3323 FS/E,F |
![]() |
![]() |
![]() |
#2 |
Member
Join Date: Feb 2009
Location: Milford, MI
Posts: 146
Likes: 11
Liked 8 Times in 5 Posts
|
![]()
I have new 08/09 Drag Pak window controllers. PM me John
__________________
John Donato Stk / SS 3435 |
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Mar 2016
Location: Crete, IL
Posts: 167
Likes: 214
Liked 56 Times in 24 Posts
|
![]()
They are in and they work as intended. Thanks John!
__________________
Todd Gross 3323 FS/E,F |
![]() |
![]() |
![]() |
#4 |
VIP Member
Join Date: Jan 2003
Location: Allentown,PA
Posts: 2,438
Likes: 786
Liked 703 Times in 206 Posts
|
![]()
One thing I have found on the DP window controls is they do not like 16v systems.
They will usually work when the car is not running , but when the car is running with a functioning alternator , voltage approaches 18-18.5 volts and the control module shuts down . I fixed the problem on one of the DP's I work on by using a Runtz dropping resister that is made for dropping 12volts down to operate 6 volt gauges on cars that were converted to 12 v.
__________________
Tom Goldman 1500 SG , 1506 STK |
![]() |
![]() |
![]() |
#5 | |
Junior Member
Join Date: Dec 2017
Location: madison wis
Posts: 10
Likes: 5
Liked 1 Time in 1 Post
|
![]() Quote:
__________________
Scott justo. 2009018 lc22r |
|
![]() |
![]() |
![]() |
#6 |
VIP Member
Join Date: Jan 2003
Location: Allentown,PA
Posts: 2,438
Likes: 786
Liked 703 Times in 206 Posts
|
![]()
Scott, you can try this reducer ,it's made to reduce from 18 volts to 12 for electric golf cart radios. I've had good results with it.
Jeg's part number is 811-conv-00
__________________
Tom Goldman 1500 SG , 1506 STK |
![]() |
![]() |
![]() |
#7 |
Member
Join Date: Jul 2002
Posts: 391
Likes: 1
Liked 303 Times in 58 Posts
|
![]()
CAN buss controllers do not like anything more that 18 volts. I have seen systems fail completely at just over 18 volts.
|
![]() |
![]() |
![]() |
#8 |
Junior Member
Join Date: Dec 2017
Location: madison wis
Posts: 10
Likes: 5
Liked 1 Time in 1 Post
|
![]()
Thank you Tom I will try that.car is at the tuners shop right now and the window issue is the last thing to do before its first trip down the track.
__________________
Scott justo. 2009018 lc22r |
![]() |
![]() |
Liked |
![]() |
#9 |
Senior Member
Join Date: Dec 2002
Posts: 878
Likes: 934
Liked 609 Times in 180 Posts
|
![]()
I have a 2016 Challenger and need help trying to get the power windows to work. Anyone know how to wire this and make this work? I am not using the factory ECM, but have the factory wiring in the doors. The Drag Pak controllers are no longer available. Thanks, Dyno 763-227-336six
|
![]() |
![]() |
![]() |
#10 |
Senior Member
Join Date: Jul 2004
Location: Minneapolis
Posts: 788
Likes: 2,890
Liked 370 Times in 102 Posts
|
![]()
Dyno, just run the AC.
__________________
Jerry Heath I/S '93 Cobra FS/J 2010 Mustang "Ebay CJ" |
![]() |
![]() |
![]() |
|
|