|
08-30-2014, 03:10 PM | #11 |
Junior Member
Join Date: Jun 2009
Location: San Antonio, Texas
Posts: 32
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Torque Converter
8' with a sprag JW
yes it went to 3000 then 5500 all 3 times I tried I have not run the car 6400 from JW Last edited by ollucky; 08-30-2014 at 03:15 PM. |
08-30-2014, 03:12 PM | #12 |
Junior Member
Join Date: Jun 2009
Location: San Antonio, Texas
Posts: 32
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Torque Converter
|
08-30-2014, 03:37 PM | #13 |
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,635
Likes: 2,747
Liked 4,805 Times in 1,828 Posts
|
Re: Torque Converter
6400 sounds high for a 406 bracket motor,,or what are you trying to run with the car?
What was the old converter acting like right before you took it out? What does JW say about this?
__________________
Real life never quite adds up.... Jay Farrar |
08-30-2014, 04:07 PM | #14 | |
Junior Member
Join Date: Jun 2009
Location: San Antonio, Texas
Posts: 32
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Torque Converter
Quote:
Just put in in last night so i have not had a chance to speak with JW. What would recomend for the combo? Vehicle Wt: 3400, Glide 32"Tall tire, 5,38 Gear Cam Spec Duration @50 272 Int 277 Exh Lobe Lift .4300 Int .4625 Exh Lobe Separation 107 Timing Events @50 32Open 60Closed Int 68.5Open 28.5Closed Exh Duration @20 305 Int 311 Exh Gross Lift .645 Int .640 Exh Degree Intake Lobe to 104 |
|
09-01-2014, 09:54 AM | #15 |
Member
Join Date: May 2014
Location: E TN
Posts: 454
Likes: 14
Liked 116 Times in 67 Posts
|
Re: Torque Converter
Ck carb, either too rich and taking time to burn up the fuel or too lean and a lag before it gets enough.
|
|
|