565 for Fast Brackets Fresh off Dyno this week!

[TheGoodBadGuy]

Now THIS is a GREAT deal.

565 Bow Tie block, splayed billet mains, Oliver rods, Stealth Callies 4.25 crank, Weisco pistons, Akerly Childs Hellfire rings, O-Ringed, Forcelle and Clark copper gaskets, Dart 360's w/all new Manley valves, springs keepers and retainers as well as a first class valve job, T&D rockers, Jesel Belt Drive, Moroso Vacuum pump, Aluminum sheetmetal covers w/ billet rails, Dart intake, MSD distributor w/crank trigger, ATI balancer. Full Comp Cams Roller Cam with Brand New Rollers. Steve Taylor Dominator, Taylor wires......on and on the list goes.

This engine was built about five years ago at a cost apoaching 20k. It ran 9.00 @ 151 in a 3400 lb foot brake Camaro w/10 tires a couple of times, after that it sat.It had less than 20 passes on it before we freshened it. We just freshened it in house. Anybody who knows me knows I don't cut corners. If there was any question at all, it was replaced. It really didn't need too much, now all it needs is a car to put it in. The dyno shows the engine has incredible torque and horsepower numbers. We stopped pulling it at 7100 but it was still climbing and we had a very safe tune in it.

A perfect engine for fast bracket Dragster or Doorslammer.Bolt it in and forget about it

This engine is built Nitrous Safe (It has never been sprayed or abused)and there is brand new NX 700 hp system set up for use with this engine. That means you can safely have the horsepower and torque of a 30-40 or 50,000.00 dollar engine.

Top Dragster
Top Sportsman
Fast Super Gas

The dyno sheets are available to serious inquirys

Buy it now for 9500.00 before I change my mind.

Happy New Year!

Adam Landolfi
732 995 2070






Adam Landolfi
www.LandysPerformance
732 462 0911