1965 Corvette Stocker build Q's

rboyle · 04-02-2021, 08:49 PM

Is the 327/300 hp combo good? Does anyone make a good carb for this setup?
Who makes a 12 bolt rear setup for the Corvette IRS rear?
Just investigating at this moment. Any and all advice is appreciated on this combo/car set up.
Thanks.
Rich Boyle

B Parker · 04-02-2021, 09:24 PM

Mark Markow did mine for my 74 vette. It's a work of art. It would hook in the water box. BP

Ernie Neal · 04-02-2021, 10:19 PM

If I was building one, I think I would go with 66-67 Holley vs the 65 AFB. The HP factor is 5 less with automatic transmission. The quick fuel carb is pretty good. The secondary throttle plates are a little larger in the AFB, but is lacking elsewhere. Just something else you might want to investigate before hand.
I think Stephen Belanger has run the AFB some on his Chevy II.

Ernie Neal
SS 354

lorenr · 04-03-2021, 02:58 PM

Why use an IRS rear, if you can run a solid axle? Seems as though the solid axle would be more efficient and weigh less with fewer parts to break. Also, would save a lot of money.

I'm wondering if there is a bolt in solid axle available. That way you could save the stock IRS for later.

Seems like I've seen an A/S or B/S with a solid. Hard to imagine a 700 HP motor not destroying almost any IRS.

Loren

rboyle · 04-03-2021, 07:40 PM

If it came with a powerglide can you change it to a 3 speed automatic? I heard mixed answers on this.

MR DERBY CITY · 04-03-2021, 08:09 PM

Quote:

Originally Posted by rboyle

If it came with a powerglide can you change it to a 3 speed automatic? I heard mixed answers on this.

Sure you can ....

Bobby Lundholm · 04-07-2021, 04:45 PM

Quote:

Originally Posted by rboyle

Is the 327/300 hp combo good? Does anyone make a good carb for this setup?
Who makes a 12 bolt rear setup for the Corvette IRS rear?
Just investigating at this moment. Any and all advice is appreciated on this combo/car set up.
Thanks.
Rich Boyle

Hammerhead IRS makes a Corvette IRS that can handle more than what a Stocker can put out.

Tim Barrett · 04-15-2021, 12:43 PM

Cool car alert!!!

04-02-2021, 08:49 PM	#1
rboyle Senior Member Join Date: Jan 2015 Posts: 604 Likes: 1,454 Liked 586 Times in 162 Posts	1965 Corvette Stocker build Q's Is the 327/300 hp combo good? Does anyone make a good carb for this setup? Who makes a 12 bolt rear setup for the Corvette IRS rear? Just investigating at this moment. Any and all advice is appreciated on this combo/car set up. Thanks. Rich Boyle

04-02-2021, 09:24 PM	#2
B Parker Senior Member Join Date: Sep 2009 Posts: 849 Likes: 980 Liked 2,336 Times in 464 Posts	Re: 1965 Corvette Stocker build Q's Mark Markow did mine for my 74 vette. It's a work of art. It would hook in the water box. BP

04-02-2021, 10:19 PM	#3
Ernie Neal Senior Member Join Date: Feb 2009 Location: Columbus, Indiana Posts: 529 Likes: 167 Liked 326 Times in 78 Posts	Re: 1965 Corvette Stocker build Q's If I was building one, I think I would go with 66-67 Holley vs the 65 AFB. The HP factor is 5 less with automatic transmission. The quick fuel carb is pretty good. The secondary throttle plates are a little larger in the AFB, but is lacking elsewhere. Just something else you might want to investigate before hand. I think Stephen Belanger has run the AFB some on his Chevy II. Ernie Neal SS 354 Last edited by Ernie Neal; 04-02-2021 at 10:25 PM. Reason: correction on factors

04-03-2021, 02:58 PM	#4
lorenr Junior Member Join Date: Jul 2014 Posts: 48 Likes: 259 Liked 19 Times in 9 Posts	Re: 1965 Corvette Stocker build Q's Why use an IRS rear, if you can run a solid axle? Seems as though the solid axle would be more efficient and weigh less with fewer parts to break. Also, would save a lot of money. I'm wondering if there is a bolt in solid axle available. That way you could save the stock IRS for later. Seems like I've seen an A/S or B/S with a solid. Hard to imagine a 700 HP motor not destroying almost any IRS. Loren

04-03-2021, 07:40 PM	#5
rboyle Senior Member Join Date: Jan 2015 Posts: 604 Likes: 1,454 Liked 586 Times in 162 Posts	Re: 1965 Corvette Stocker build Q's If it came with a powerglide can you change it to a 3 speed automatic? I heard mixed answers on this.

04-15-2021, 12:43 PM	#8
Tim Barrett Member Join Date: Jul 2002 Location: Fort Ann New York State Posts: 142 Likes: 967 Liked 468 Times in 71 Posts	Re: 1965 Corvette Stocker build Q's Cool car alert!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode