NMCA pictures

Lynn A McCarty · 10-10-2008, 11:14 AM

Quote:

Originally Posted by 1664SSJA

Are front end limiters allowed? Would they help at ALL with your kind of car?

Mark

If you watch that film clip, you will notice that there is very little front end travel.

John Langer · 10-14-2008, 10:20 AM

The tires have around 94" roll out and have a tread width of around 10.2"

Raceready · 10-14-2008, 10:38 PM

John,if you don't mind tellin'.What intake are you running.?

John Langer · 10-15-2008, 06:43 AM

Cast single 4 All Pontiac Tiger intake. Class rules prohibit any welding or epoxy on either the inside or outside, only conventional porting allowed. Maximum carb spacer of 2".

10-14-2008, 10:20 AM	#2
John Langer Junior Member Join Date: Sep 2008 Posts: 27 Likes: 0 Liked 3 Times in 1 Post	Re: NMCA pictures The tires have around 94" roll out and have a tread width of around 10.2"

10-14-2008, 10:38 PM	#3
Raceready Junior Member Join Date: Mar 2004 Posts: 34 Likes: 0 Liked 0 Times in 0 Posts	Re: NMCA pictures John,if you don't mind tellin'.What intake are you running.?

10-15-2008, 06:43 AM	#4
John Langer Junior Member Join Date: Sep 2008 Posts: 27 Likes: 0 Liked 3 Times in 1 Post	Re: NMCA pictures Cast single 4 All Pontiac Tiger intake. Class rules prohibit any welding or epoxy on either the inside or outside, only conventional porting allowed. Maximum carb spacer of 2".

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode