|
|
07-16-2025, 06:20 PM
|
#1 |
|
Member
Join Date: Jan 2012
Location: Sandusky, Ohio
Posts: 353
Likes: 95
Liked 226 Times in 74 Posts
|
Flush
What is the best method for flushing the cooling system at home? Trans builder said to flush the system after finding debris in my trans.
__________________
J.T. Rose & Associates U/SA T/SA 302R |
|
|
|
07-16-2025, 06:50 PM
|
#2 | |
|
Veteran Member
Join Date: May 2006
Location: Murfreesboro TN
Posts: 5,105
Likes: 1,561
Liked 1,788 Times in 408 Posts
|
Re: Flush
Quote:
Most parts stores carry "Cooler Flush", usually, two cans will do the trick to flush a transmission cooler.
__________________
Alan Roehrich 212A G/S |
|
|
|
|
| Liked |
|
07-16-2025, 10:52 PM
|
#3 |
|
Senior Member
Join Date: Sep 2006
Location: Fulton County, PA
Posts: 612
Likes: 16
Liked 915 Times in 257 Posts
|
Re: Flush
Kooler Kleen
|
|
|
|
| Liked |
|
07-17-2025, 08:25 AM
|
#4 |
|
Senior Member
Join Date: Jan 2024
Location: Charlotte, NC
Posts: 564
Likes: 1,599
Liked 1,169 Times in 331 Posts
|
Re: Flush
I don't know if this is good or bad, but historically, I've just sprayed a bunch of brake clean through the lines and blown them out with an air hose. Makes a mess but gets the job done.
__________________
Dawson Pauley #2827 N/SA 1980 Malibu SW 2S 305/180 #2827 S/ST 1978 Mazda RX7 w/ 383 sbc/glide |
|
|
|
| Liked |
|
07-17-2025, 12:49 PM
|
#5 | |
|
Member
Join Date: May 2017
Location: Webster, New York
Posts: 217
Likes: 467
Liked 207 Times in 88 Posts
|
Re: Flush
Quote:
Trans guy wants you to flush the transmission fluid cooler in the radiator or wants you to flush the antifreeze? If you have debris in the transmission fluid cooler side of the radiator some times it is best to install a new radiator. Ray
__________________
Ray Bassett I/SA 1687, SS/DA 1687 "SuperPro is both", unknown |
|
|
|
|
|
07-17-2025, 02:03 PM
|
#6 | |
|
VIP Member
Join Date: Mar 2007
Posts: 2,443
Likes: 613
Liked 1,916 Times in 574 Posts
|
Re: Flush
Quote:
__________________
Mike Pearson 2485 SS |
|
|
|
|
|
07-17-2025, 03:29 PM
|
#7 | |
|
Member
Join Date: Aug 2010
Location: CT
Posts: 456
Likes: 1,795
Liked 346 Times in 150 Posts
|
Re: Flush
Quote:
A plate and fin type cooler should be replaced, tube style can be flushed. Either one, WAY cheaper than another trans rebuild because of recirculated trash.
__________________
Phil Molski PMR Performance S/C 1623 |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
