Consistency

[Barso1514]

Originally Posted by Mike Pearson

Sounds like you have some good equipment there. What kind of weather station and prediction software are you using to figure your dial in? I would try to get the weight down closer to your min weight. That will help some with consistency. I use an oil pan heater to keep the oil temp consistent between rounds

So I have pan heaters for trans and motor. I have a race air cloud with their race base software. I definitely do not cheap out on things. I try to buy the best of the best as long as I can afford it. I just put a grid in it to help slow it down because at minimum I?d do more harm then good due to the old ahfs

[SS3860]

Originally Posted by Barso1514

So I have pan heaters for trans and motor. I have a race air cloud with their race base software. I definitely do not cheap out on things. I try to buy the best of the best as long as I can afford it. I just put a grid in it to help slow it down because at minimum I?d do more harm then good due to the old ahfs

I used to bracket race with a grid. Found car was more consistent running with the proper timing and at peak power than pulling timing and slowing car down. Now if you're using the ARC module dot to dot that's a different story.

Tom Flowers
E/SA 3860