|
|
11-23-2023, 11:21 AM
|
#1 |
|
Junior Member
Join Date: Jan 2010
Posts: 83
Likes: 0
Liked 12 Times in 6 Posts
|
1968-1972 GM A Body Bump Steer Kit
Anyone make a bump steer kit for this type of chassis that raises the outer tie rod. All kits I can find seem to lower the outer tie rod. Based on my measurements I need to raise the outer tie rod about 0.5 inches to reduce bump steer.
|
|
|
|
11-23-2023, 11:28 AM
|
#2 | |
|
VIP Member
Join Date: Feb 2003
Location: Glendale, Arizona
Posts: 3,043
Likes: 712
Liked 1,578 Times in 581 Posts
|
Re: 1968-1972 GM A Body Bump Steer Kit
Quote:
https://www.speedwaymotors.com/Modif...SEGOOGLE&nis=6 https://www.umiperformance.com/home/...-adjuster-kit/ https://www.trzmotorsports.com/produ...ck-steering-4/ |
|
|
|
|
|
11-23-2023, 11:36 AM
|
#3 |
|
Junior Member
Join Date: Jan 2010
Posts: 83
Likes: 0
Liked 12 Times in 6 Posts
|
Re: 1968-1972 GM A Body Bump Steer Kit
Speedway motors kit is for a pinto type spindle.
All the other kits are designed to lower the tie rods from my understanding. |
|
|
|
|
11-23-2023, 11:40 AM
|
#4 |
|
VIP Member
Join Date: Nov 2007
Location: New Jersey
Posts: 2,628
Likes: 160
Liked 759 Times in 379 Posts
|
Re: 1968-1972 GM A Body Bump Steer Kit
what you need and want are anti dive bars, designed by Larry Pappas
|
|
|
|
|
11-23-2023, 07:40 PM
|
#5 |
|
Junior Member
Join Date: Jan 2010
Posts: 83
Likes: 0
Liked 12 Times in 6 Posts
|
Re: 1968-1972 GM A Body Bump Steer Kit
anti dive bars? You mean the cross shafts on the upper control arm?
|
|
|
|
|
11-23-2023, 08:48 PM
|
#6 |
|
VIP Member
Join Date: Nov 2007
Location: New Jersey
Posts: 2,628
Likes: 160
Liked 759 Times in 379 Posts
|
Re: 1968-1972 GM A Body Bump Steer Kit
yep
|
|
|
|
|
11-28-2023, 11:35 AM
|
#7 |
|
Junior Member
Join Date: Jan 2010
Posts: 83
Likes: 0
Liked 12 Times in 6 Posts
|
Re: 1968-1972 GM A Body Bump Steer Kit
https://www.cachassisworks.com/p-294...-aluminum.aspx
I guess these are legal. My outer tie rods needed to be raised to reduce bump steer. Already had the Weibe anti dive cross shafts. |
|
|
|
|
11-28-2023, 01:54 PM
|
#9 |
|
Junior Member
Join Date: Jan 2010
Posts: 83
Likes: 0
Liked 12 Times in 6 Posts
|
Re: 1968-1972 GM A Body Bump Steer Kit
Just trying to get every last thousand of ET out of it. Toe changes about 1/4" each side as currently set up from full compression to full extension. Wheels shimmy a bit when landing from wheel stand. Might be nothing there.
|
|
|
|
|
11-28-2023, 03:31 PM
|
#10 | |
|
VIP Member
Join Date: Feb 2003
Location: Glendale, Arizona
Posts: 3,043
Likes: 712
Liked 1,578 Times in 581 Posts
|
Re: 1968-1972 GM A Body Bump Steer Kit
Quote:
https://www.globalwest.net/a-body-19...bumpsteer.html |
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
