Hemi splined input shaft wanted

older racer · 07-03-2023, 01:23 PM

i did same, used aluminum shafting, no splines works great and cheap.

Adger Smith · 07-05-2023, 11:37 AM

If you are having problems with alignment with the plastic just get it close and put someone in the car and release the clutch as you are putting the trans into the splines. That floats the disc and it should self align, esp if you have the trans on slides or dowels.

KRatcliff · 07-05-2023, 01:23 PM

Quote:

Originally Posted by Adger Smith

If you are having problems with alignment with the plastic just get it close and put someone in the car and release the clutch as you are putting the trans into the splines. That floats the disc and it should self align, esp if you have the trans on slides or dowels.

That is what I generally do when I am having trouble, but my alpaca isn't always available and I have to do it alone.

07-03-2023, 01:23 PM	#1
older racer Member Join Date: Aug 2010 Posts: 211 Likes: 13 Liked 64 Times in 25 Posts	Re: Hemi splined input shaft wanted i did same, used aluminum shafting, no splines works great and cheap.

07-05-2023, 11:37 AM	#2
Adger Smith VIP Member Join Date: Dec 2001 Location: Texarkana Ark/TX Posts: 2,446 Likes: 575 Liked 880 Times in 311 Posts	Re: Hemi splined input shaft wanted If you are having problems with alignment with the plastic just get it close and put someone in the car and release the clutch as you are putting the trans into the splines. That floats the disc and it should self align, esp if you have the trans on slides or dowels. __________________ Adger Smith (Former SS)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode