|
|
|
|
07-13-2021, 05:59 PM
|
#2 |
|
VIP Member
Join Date: Jul 2008
Location: Liberty City [East Texas]
Posts: 1,760
Likes: 5
Liked 99 Times in 60 Posts
|
Re: "Family Tradition" a build for Daughter & Grandchildren
When converting a factory stock truck to a drag race truck, it is necessary to turn all bolts anti-clockwise. Later, after modifying each piece, bolts can be turned clockwise.
__________________
Larry Woodfin 471W |
|
|
| Liked |
|
07-13-2021, 06:01 PM
|
#3 |
|
VIP Member
Join Date: Jul 2008
Location: Liberty City [East Texas]
Posts: 1,760
Likes: 5
Liked 99 Times in 60 Posts
|
Re: "Family Tradition" a build for Daughter & Grandchildren
Jake, it is a footbrake [bottom bulb] bracket racer.
__________________
Larry Woodfin 471W |
|
|
|
|
07-23-2021, 09:05 PM
|
#4 |
|
Senior Member
Join Date: Jun 2011
Location: Langley (no igloos), British Columbia, Canada
Posts: 569
Likes: 310
Liked 284 Times in 87 Posts
|
Re: "Family Tradition" a build for Daughter & Grandchildren
'Singer... Are the rear tires like a 29.5 x 11.5 or 14 x 32? MB
|
|
|
|
|
07-23-2021, 09:20 PM
|
#5 |
|
VIP Member
Join Date: Jul 2008
Location: Liberty City [East Texas]
Posts: 1,760
Likes: 5
Liked 99 Times in 60 Posts
|
Re: "Family Tradition" a build for Daughter & Grandchildren
Maurice, 29.5 x 11. The wheels and tires pictured are for mockup, and I will likely run a radial in the 29.5 x 11 range. The bias tires pictured are new but several years old. I might run the bias for a few test outings.
__________________
Larry Woodfin 471W |
|
|
|
| Liked |
|
08-02-2021, 04:43 PM
|
#6 |
|
VIP Member
Join Date: Jul 2008
Location: Liberty City [East Texas]
Posts: 1,760
Likes: 5
Liked 99 Times in 60 Posts
|
Re: "Family Tradition" a build for Daughter & Grandchildren
A few updated photos.
__________________
Larry Woodfin 471W |
|
|
|
|
08-02-2021, 05:05 PM
|
#7 |
|
VIP Member
Join Date: Jul 2008
Location: Liberty City [East Texas]
Posts: 1,760
Likes: 5
Liked 99 Times in 60 Posts
|
Re: "Family Tradition" a build for Daughter & Grandchildren
When the frame mods are complete, all will be braced and triangulated as needed. Another cross-member will accommodate the shocks, and the Antiroll bar will be in front of the diff.
__________________
Larry Woodfin 471W |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
