79 Malibu- Stocker-Stick Shift

[J518]

Now if I could only hide the 30 wires from the grid that I won't be using.....

[a pontiac]

I think you need 2 bars running from the top of main hoop to the rear frame. I maybe wrong might check rule book.

[FireSale]

Looks nice. Now that I see the photos of your electrical layout everything makes sense. Good luck fitting all this stuff in your glove box with room for expansion. I tried that with my Mustang and wound up with a panel on the passenger side foot board. But that's a Ford....
Keep up the good work.

[FireSale]

Originally Posted by a pontiac

I think you need 2 bars running from the top of main hoop to the rear frame. I maybe wrong might check rule book.

I checked back in the book (I run a 10 point cage), and this is correct. This car has the crossbar angle braced but not the top hoop. Here's a pic from the 2020 book:

[J518]

Originally Posted by FireSale

I checked back in the book (I run a 10 point cage), and this is correct. This car has the crossbar angle braced but not the top hoop. Here's a pic from the 2020 book:

Thanks guys. Looks like you're correct. We'll add it to the list!

[J518]

Stick Shift Necessities!!!

[J518]

Looking back, can't believe we missed the main hoop support bars but thankfully it was brought to our attention before the interior was in.
So thank you!
We made quick work with a saturday afternoon and added two bars.

[J518]

To wrap up our afternoon we settled on our fuel cell location. Made our fuel cell band before running out of enough material for a on the second one.