|
|
![]() |
#1 |
Junior Member
Join Date: Feb 2015
Posts: 73
Likes: 11
Liked 151 Times in 37 Posts
|
![]()
Sandblasted and Powder Coating done
![]() ![]() |
![]() |
![]() |
Liked |
![]() |
#2 |
Junior Member
Join Date: Feb 2015
Posts: 73
Likes: 11
Liked 151 Times in 37 Posts
|
![]()
Reassembly Starting!
![]() ![]() |
![]() |
![]() |
Liked |
![]() |
#3 |
Junior Member
Join Date: Feb 2015
Posts: 73
Likes: 11
Liked 151 Times in 37 Posts
|
![]()
A-Body 12 Bolt Cut to length, powdercoated, 33 spline axles, c clip eliminators, and brackets repurposed from the 10 bolt. All done by us.
![]() ![]() |
![]() |
![]() |
![]() |
#4 |
Junior Member
Join Date: Feb 2015
Posts: 73
Likes: 11
Liked 151 Times in 37 Posts
|
![]()
Underbody Coating. We went with POR 15.
![]() ![]() |
![]() |
![]() |
Liked |
![]() |
#5 |
Junior Member
Join Date: Feb 2015
Posts: 73
Likes: 11
Liked 151 Times in 37 Posts
|
![]()
Tranny set in place so we could fabricate the cross member. The malibus of this year have awful stock crossmember design.
Also rear end in place. Don't mind the shims behind the antihop bars, we were told the upper control arms were the right ones for the 12 bolt swap. Wrong ![]() ![]() |
![]() |
![]() |
![]() |
#6 |
Junior Member
Join Date: Feb 2015
Posts: 73
Likes: 11
Liked 151 Times in 37 Posts
|
![]()
Undercoating done.
![]() ![]() |
![]() |
![]() |
Liked |
![]() |
#7 |
Junior Member
Join Date: Feb 2015
Posts: 73
Likes: 11
Liked 151 Times in 37 Posts
|
![]()
Rollbar installed and body dropped back down.
![]() ![]() |
![]() |
![]() |
![]() |
#8 |
Member
Join Date: Oct 2009
Location: columbus, georgia
Posts: 385
Likes: 66
Liked 309 Times in 88 Posts
|
![]()
Really nice build, you and your Dad do great work.
If you haven't addressed the front brakes yet when Jim Cassels ordered front brakes for his 78 Malibu he found out that there was a difference between 78 spindles and 79 spindles, he bought brakes from Mark Williams for a 79 and ran into a problem, I can't remember what the difference was but just remember there was a problem he had to work thru. |
![]() |
![]() |
Liked |
![]() |
#9 |
Senior Member
Join Date: Oct 2010
Location: Indiana
Posts: 830
Likes: 1,613
Liked 359 Times in 135 Posts
|
![]()
__________________
Who owns this car, with the peace sign,mag wheels, and four on the floor? |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|