|
|
![]() |
#1 |
Member
Join Date: Jul 2002
Posts: 243
Likes: 36
Liked 34 Times in 12 Posts
|
![]()
I have built two of these cars and have not had problems with body roll, not sure if it is how they were setup or lack of power, lol.
I worked with Ed 20 years ago and he provided details on the setup that are still in my car today. My car is setup neutral- no squat and no separation. I have some preload in top passenger bar but minimal. Bottom bar is 2 degrees down, cannot remember top bar location. I scale car with 40# more on driver rear than passenger rear. Front is same side to side. I did have driver front springs 1/2 coil higher initially but went to Santuff springs which are equal. Never saw a difference in roll. In my humble opinion- if the shocks are set soft, rear springs are soft or 4 link is set for excessive squat- you could have the body roll. It appears some cars require anti roll bar and some do not, everybody has a different recipe. |
![]() |
![]() |
Liked |
![]() |
#2 |
VIP Member
Join Date: Jul 2008
Location: Liberty City [East Texas]
Posts: 1,760
Likes: 5
Liked 99 Times in 60 Posts
|
![]()
Bert, Thanks, I appreciate the note.
__________________
Larry Woodfin 471W |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|