lift vs air flow?

SST3193 · 01-09-2020, 10:59 PM

20 years ago I home ported a pair of 906 Mopar heads and installed them, along with a .650 Comp Solid. Damn bracket car would pick the darned time to stall, near the finish line and pop out the exhaust.
Installed a much better fuel system and ignition system, eliminating problems from either. Raced the year out and took the heads to a flowbench and found that they stalled almost exactly at .500 lift.
Car seemed to run well until high gear when, of course the thing would go lean.

01-09-2020, 10:59 PM	#4
SST3193 Junior Member Join Date: Oct 2009 Posts: 37 Likes: 2 Liked 2 Times in 2 Posts	Re: lift vs air flow? 20 years ago I home ported a pair of 906 Mopar heads and installed them, along with a .650 Comp Solid. Damn bracket car would pick the darned time to stall, near the finish line and pop out the exhaust. Installed a much better fuel system and ignition system, eliminating problems from either. Raced the year out and took the heads to a flowbench and found that they stalled almost exactly at .500 lift. Car seemed to run well until high gear when, of course the thing would go lean.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode