WTB: Mopar X or R-block

PPRCuda · 04-07-2019, 01:05 AM

Quote:

Originally Posted by 340Cuda

What deck height, main bearing size and bore can you use?

Std 9.60" deck height, 340 mains, Bore smaller than 4.07"

340Cuda · 04-07-2019, 11:47 AM

Well as you know that is the most wanted and most expensive Mopar race block.

You might want to consider a Ritter block. I would not buy one used as the first ones did have some issues. I have seen good things about the new ones and they are NHRA approved.

Hughes sells them for a little under $3,200 last time I looked which is not much more than you see folks asking for new ones like you want.

04-07-2019, 11:47 AM	#2
340Cuda VIP Member Join Date: Apr 2003 Location: Tulsa, Oklahoma Posts: 1,671 Likes: 3,859 Liked 801 Times in 338 Posts	Re: WTB: Mopar X or R-block Well as you know that is the most wanted and most expensive Mopar race block. You might want to consider a Ritter block. I would not buy one used as the first ones did have some issues. I have seen good things about the new ones and they are NHRA approved. Hughes sells them for a little under $3,200 last time I looked which is not much more than you see folks asking for new ones like you want.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode