Want to run 9.90

jlundy · 02-06-2019, 04:26 PM

Quote:

Originally Posted by Hacksaw

I think as long as you have some decent rpm and wheel speed on the stop the converter can handle it and recover quickly. Lots of PG racers do this now. Check with a doughnut maker and get there advice.

I would call Chris Continental but they are out of business.

jlundy · 05-23-2019, 01:57 PM

Ok, so I made some passes and the car without any tuning or real testing is running 9.55 @ 140.21 @6200ft DA.

1-2 shift @ 1.8 secs and 2-3 shift @ 3.9 secs obviously short shifting some.
A-1 converters just built me a killer converter.

Super Gas adjusted index is 10.30 at my track.

I need to figure when and how long to put it on the stop now.

Ken MacNicol · 05-24-2019, 11:19 AM

Turn stop on about .2 then shift into 2nd about .5 and come off stop in 2nd and shift into third off RPMs

05-23-2019, 01:57 PM	#2
jlundy Junior Member Join Date: Jan 2019 Posts: 12 Likes: 0 Liked 0 Times in 0 Posts	Re: Want to run 9.90 Ok, so I made some passes and the car without any tuning or real testing is running 9.55 @ 140.21 @6200ft DA. 1-2 shift @ 1.8 secs and 2-3 shift @ 3.9 secs obviously short shifting some. A-1 converters just built me a killer converter. Super Gas adjusted index is 10.30 at my track. I need to figure when and how long to put it on the stop now. Last edited by jlundy; 05-23-2019 at 01:59 PM.

05-24-2019, 11:19 AM	#3
Ken MacNicol Junior Member Join Date: Apr 2010 Location: Hendersonville, Tn. Posts: 84 Likes: 916 Liked 26 Times in 12 Posts	Re: Want to run 9.90 Turn stop on about .2 then shift into 2nd about .5 and come off stop in 2nd and shift into third off RPMs

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode