|
|
![]() |
#1 |
Junior Member
Join Date: Nov 2013
Posts: 30
Likes: 0
Liked 4 Times in 4 Posts
|
![]()
I do know if you are low on power dropping that cruise rpm gets unpredictable. And if you make good power getting it too high puts too many numbers in the timer. It’s a test and tune fine tuning point til you find what works on your car. I’ve been on at .001 with a Maxspeed, on at .10 same carb...you just have to have enough power to do it that soon or it will know the breath out of it and you’ll get a dip. I had a big motor combo that liked .001 and shift at .020.at 4300 and it worked well. Tried it with a smaller motor and it was a no go
|
![]() |
![]() |
![]() |
#2 | |
VIP Member
Join Date: Feb 2006
Location: Dela-where?
Posts: 2,193
Likes: 1,162
Liked 1,877 Times in 577 Posts
|
![]() Quote:
Every engine/combo is different. The key? Test, Test, and Test some more. The combo will show you what it likes, not the other way around...
__________________
KEITH MAYERS 2-1/2 X somebody Still many X nobody |
|
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Aug 2009
Location: yarnell,az
Posts: 312
Likes: 414
Liked 124 Times in 44 Posts
|
![]()
4400 on launch, .050 on stop 2300 rpm, off stop 2.75, 10.90@147 and change at the stripe works for me
|
![]() |
![]() |
![]() |
#4 |
Member
Join Date: Mar 2010
Posts: 312
Likes: 40
Liked 37 Times in 33 Posts
|
![]()
Lenny5160,
When running 9.90 I go on the stop at 0.001 and coast at 4150. I come off the stop in high gear. My 1/8 mile is 7.02 @ 131.83 compared to 1/8 mile WOT 4.66 @ 150.00 I lose 18-19 mph. |
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Nov 2015
Location: Inver Grove Heights, MN
Posts: 898
Likes: 604
Liked 431 Times in 224 Posts
|
![]()
You're about the highest MPH S/G guy that I know of. Probably coming off the stop around the 330 cone.
__________________
S/ST 51 S/C 53 |
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Jun 2003
Location: Las Vegas nv
Posts: 600
Likes: 18
Liked 66 Times in 37 Posts
|
![]()
Can a double 0 dead on 122 mph car beat a 150 mph car?
__________________
72 cutlass |
![]() |
![]() |
![]() |
#7 |
VIP Member
Join Date: Feb 2006
Location: Dela-where?
Posts: 2,193
Likes: 1,162
Liked 1,877 Times in 577 Posts
|
![]()
119 Beat my butt more than once.
__________________
KEITH MAYERS 2-1/2 X somebody Still many X nobody |
![]() |
![]() |
![]() |
#8 |
Senior Member
Join Date: Jun 2003
Location: Las Vegas nv
Posts: 600
Likes: 18
Liked 66 Times in 37 Posts
|
![]()
I have a 57 chevy sbc mini blower I have been kicking the S/ST idea around. This would be just a fun car trying to run 10.80s flatout footbraking it. I'm usually red on a pro tree. I would give it a shot unless someone talks some sense into me. Has anyone ever won without all the electronics? Im sure there would be a train following me to the lanes.
__________________
72 cutlass |
![]() |
![]() |
![]() |
#9 | |
VIP Member
Join Date: Feb 2006
Location: Dela-where?
Posts: 2,193
Likes: 1,162
Liked 1,877 Times in 577 Posts
|
![]() Quote:
another guy from Atco runs our .90 series sometimes and uses no electronics and is very good If I had a roll bar in my street /strip car I would use that as a back up without thinking twice. Give it a try you might get hooked I see you are from Pennsylvania come run one of our mid Atlantic .90 races, the tree is set at .500 not @ .470 it would be perfect to get some seat time
__________________
KEITH MAYERS 2-1/2 X somebody Still many X nobody Last edited by Keith 944; 04-22-2019 at 09:21 AM. |
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|