Race Hemi Camshaft Wanted

SSSwede · 10-20-2017, 04:07 PM

Application is 1968/69 SS/B Hemi in my Nostalgia Barracuda Racer.
Must be in the .600 lift rage...
and harmonize with this unmodified engine in terms of porting and small tube headers.
Let me see what you have stashed away.
Thank you.

And yes, shipping is for FL

SSSwede · 10-20-2017, 04:15 PM

Quote:

Originally Posted by SSSwede

Application is 1968/69 SS/B Hemi in my Nostalgia Barracuda Racer.
Must be in the .600 lift rage...
and harmonize with this unmodified engine in terms of porting and small tube headers.
Let me see what you have stashed away.
Thank you.

And yes, shipping is for FL.

James L Miller · 10-20-2017, 10:56 PM

☻☺

SSSwede · 10-21-2017, 04:00 PM

Quote:

Originally Posted by James L Miller

I have a new-in-the-box Comp Cams roller cam, 292°@.050", .750" lift, etc. It's the old SS grind. Probably more than what you want. I found a flat tappet cam on Summit Racing that looks more like what you want.

https://www.summitracing.com/int/par...iew/make/dodge

Yes, even bigger than the Crane Roller 290 I have now.
And yes, a new Cam is not that hard to find...

Thank You anyway.

10-20-2017, 04:07 PM	#1
SSSwede Junior Member Join Date: Sep 2015 Posts: 50 Likes: 0 Liked 2 Times in 2 Posts	Race Hemi Camshaft Wanted Application is 1968/69 SS/B Hemi in my Nostalgia Barracuda Racer. Must be in the .600 lift rage... and harmonize with this unmodified engine in terms of porting and small tube headers. Let me see what you have stashed away. Thank you. And yes, shipping is for FL Last edited by SSSwede; 10-20-2017 at 04:16 PM.

10-20-2017, 10:56 PM	#3
James L Miller Member Join Date: Apr 2005 Posts: 494 Likes: 6 Liked 25 Times in 16 Posts	Re: Race Hemi Camshaft Wanted ☻☺ __________________ Mopar 2 Ya! Last edited by James L Miller; 10-21-2017 at 08:37 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode