|
|
|
|
09-12-2017, 03:51 PM
|
#1 |
|
Senior Member
Join Date: May 2003
Location: London Ontario
Posts: 515
Likes: 40
Liked 262 Times in 74 Posts
|
Re: S/SS Brake safety
On My Escort the Pedal is attached to the Master cyl Rod with a pin right from the factory.
__________________
Steve Polhill 3520 STOCK, COMP |
|
|
|
09-12-2017, 04:22 PM
|
#2 |
|
Senior Member
Join Date: Sep 2016
Posts: 882
Likes: 206
Liked 310 Times in 174 Posts
|
Re: S/SS Brake safety
I went off the end at Martin about 10 years ago. Frightening to say the least. My fix was to form a "top hat" from heavy sheet metal flat bar with the two outer holes matching the master cyl mounting holes and a center clearance hole for the pushrod to go through. After a mockup, I marked the exact spot for a flat washer to get welded on the rod, on the cyl side of the "top hat" with a slight amount of clearance. Simple and works.
|
|
|
|
|
09-12-2017, 04:50 PM
|
#3 |
|
Junior Member
Join Date: Apr 2013
Posts: 43
Likes: 73
Liked 1 Time in 1 Post
|
Re: S/SS Brake safety
Thanks Tom, your advise is greatly appreciated!
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
