454 missing caps

Rich Biebel · 09-21-2015, 01:45 PM

Mains were bored after caps were installed and caps don't all interchange well. The Register locates the cap so when replacing caps, it usually meant trying a number of them to find a close fit first. Once your close it can be align bored and or honed. You could find a cap that fit the register but the bore was off too far to align bore it. Aftermarket caps are small to allow for this issue. Most shops saved old caps just for this purpose.

09-21-2015, 01:45 PM	#2
Rich Biebel VIP Member Join Date: Jun 2007 Location: Northern New Jersey suburbs Posts: 2,315 Likes: 25 Liked 544 Times in 213 Posts	Re: 454 missing caps Mains were bored after caps were installed and caps don't all interchange well. The Register locates the cap so when replacing caps, it usually meant trying a number of them to find a close fit first. Once your close it can be align bored and or honed. You could find a cap that fit the register but the bore was off too far to align bore it. Aftermarket caps are small to allow for this issue. Most shops saved old caps just for this purpose. __________________ Rich Biebel S/C 1479 Stock 147R

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode