Your opinions - What will Happen if...

theman440 · 05-26-2014, 11:07 PM

Thanks for the input guys - the car 60fts very consistent and I do use a complete CalTracs set up, front end has 5 inches of drop and I use 6-cyl bars.. Removing the undercoating is an idea I never thought of - I think I might try that. I want to get some upper tubular a-arms that use heim joints - I figure the heim joints will be freer than bushings. Does anybody make aluminum or bronze lower control arm bushings to replace the rubber?

BTW - I won Street Muscle @ the PSCA Las Vegas Nationals this weekend. The car 60ft 1.50-1.51 all weekend.

05-26-2014, 11:07 PM	#4
theman440 Member Join Date: Apr 2013 Location: Fabulous Las Vegas Posts: 114 Likes: 29 Liked 24 Times in 13 Posts	Re: Your opinions - What will Happen if... Thanks for the input guys - the car 60fts very consistent and I do use a complete CalTracs set up, front end has 5 inches of drop and I use 6-cyl bars.. Removing the undercoating is an idea I never thought of - I think I might try that. I want to get some upper tubular a-arms that use heim joints - I figure the heim joints will be freer than bushings. Does anybody make aluminum or bronze lower control arm bushings to replace the rubber? BTW - I won Street Muscle @ the PSCA Las Vegas Nationals this weekend. The car 60ft 1.50-1.51 all weekend. __________________ Jeff Dudgeon '66 Coronet #10771 - bracket puke "the Flying Brick" Last edited by theman440; 05-26-2014 at 11:09 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode