|
|
04-13-2014, 03:03 PM
|
#10 |
|
Veteran Member
Join Date: May 2006
Location: Murfreesboro TN
Posts: 5,118
Likes: 1,576
Liked 1,837 Times in 417 Posts
|
Re: TH200 issue
A stator shaft problem should show up on a data logger in a very obvious manner. The starting line RPM should be substantially lower, at least 2000 RPM lower than a previous "good pass". When the stator shaft spins, the converter will not flash, and it will not multiply torque.
With clutches, or the "sprag", RPM should be slightly higher, but driveshaft RPM should be lower.
__________________
Alan Roehrich 212A G/S |
|
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode