DP rear axle assembly

denbreeden · 08-19-2013, 02:51 PM

Quote:

Originally Posted by DonatoEng

The window control module will fail with a 16 volt system. You need to use a step down to feed the windows with 13v or less. If you eliminate the smart switch system you need to be sure to roll the window up after you get in the car or the glass will be on the outside of the seal. Not a pretty site at speed with the window pulling out.
PM me if you need window modules for the DP

My windows have worked just fine for 3 years now on 16V, I replaced the factory switches and circuit board with dpdt switches,

Dennis Breeden

Andys dad · 08-20-2013, 12:14 AM

"destroying the integrity" just when was the integrity

Just stirring ..

Ron

08-20-2013, 12:14 AM	#2
Andys dad VIP Member Join Date: Aug 2006 Location: Arcadia, Ca Posts: 1,571 Likes: 48 Liked 175 Times in 78 Posts	Re: DP rear axle assembly "destroying the integrity" just when was the integrity Just stirring .. Ron __________________ time is our most precious resource, you can always make more money but you can never make more time spend your time wisely with the ones you love - Ron Durham

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode