Ford 5.0 Valve Springs

Notch1320 · 07-22-2007, 08:38 PM

Gary, thanks for the compliment. Now if I could just get all the bugs worked out with the clutch...

The machine work required for the rockers is minimal. Took us about 30 minutes once we had the simple jig made. Taking a look at the 07 rule book, it looks like Beehive springs are now legal... Is that correct, or am I just reading into it wrong?

Anyway, let me know if you find any other springs that are similar to the 999's.

Best of luck with your car.

07-22-2007, 08:38 PM	#1
Notch1320 Member Join Date: May 2004 Location: Yuba City, CA Posts: 220 Likes: 0 Liked 0 Times in 0 Posts	Re: Ford 5.0 Valve Springs Gary, thanks for the compliment. Now if I could just get all the bugs worked out with the clutch... The machine work required for the rockers is minimal. Took us about 30 minutes once we had the simple jig made. Taking a look at the 07 rule book, it looks like Beehive springs are now legal... Is that correct, or am I just reading into it wrong? Anyway, let me know if you find any other springs that are similar to the 999's. Best of luck with your car. __________________ Shawn Allsup K/S 718

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode