Rearend Fluid - Synthetic or not?

Ben Kallies · 07-18-2007, 11:05 AM

Can I assume that it is OK to break it in with the synthetic as well? Thanks for the help. - Ben Kallies 3869

Arnold Greene · 07-18-2007, 11:19 AM

Yes, it is fine for break in. The last moly that I bought was under the name, Mr. Moly. Most parts stores carry it, but it only comes in quarts, that I have found. I think I paid $28 for the last quart I bought. Also helps in the Jerico.

You will most likely have to reset your backlash after your first race. The Pro gears have a tendency to bend the teeth on the ring gear, and then stabilize.

07-18-2007, 11:05 AM	#1
Ben Kallies Member Join Date: Jan 2005 Location: Milwaukee, WI Posts: 107 Likes: 2 Liked 0 Times in 0 Posts	Re: Rearend Fluid - Synthetic or not? Can I assume that it is OK to break it in with the synthetic as well? Thanks for the help. - Ben Kallies 3869

07-18-2007, 11:19 AM	#2
Arnold Greene Member Join Date: Mar 2003 Posts: 136 Likes: 0 Liked 3 Times in 2 Posts	Re: Rearend Fluid - Synthetic or not? Yes, it is fine for break in. The last moly that I bought was under the name, Mr. Moly. Most parts stores carry it, but it only comes in quarts, that I have found. I think I paid $28 for the last quart I bought. Also helps in the Jerico. You will most likely have to reset your backlash after your first race. The Pro gears have a tendency to bend the teeth on the ring gear, and then stabilize. __________________ Arnold Greene IHRA/NHRA 2420 A/S, B/S

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode