God save us from the NHRA tech dept

RLR, Good eye on the '64 frontend. Since I was not at the race and have not seen the car in person I can only go by what is in the classguide.

NHRA now accepts the 426 Hemi with single 4-bl carb for Stock. At 430 refactored horsepower a car would weigh 3610 for A/SA. It is shown as an aluminum frontend combination. The "NASCAR" version used 4 headlights instead of the dragrace version that only had two.


Disclaimer: Opinions expressed by me on this forum are exactly that, my opinions.

[Jeff Lee]

MOPAR aluminum front end cars can run steel in lieu of aluminum also.
T/A Challenger scoops are allowable per Chrysler documentation to NHRA.

[Jeff Teuton]

That is the same car that was 400 hp factory, factored to 410 to start, and before I could build one it was factored to 430 hp. I still haven't figured out if the factory single 4bbl (850 or 3 barrel) cross ram is allowed. We had one of these cars and it had a scoop. It was a Dodge version. Along with 'How have you been?', how do you see it, Travis?

Jeff, I am doing great but busy with our Division 3 swing (3 division races in a row).

The manifold and carb numbers are listed in the tech specs. As a Mopar man you should be able to trace them down through Chrysler.


Disclaimer: Opinions expressed by me on this forum are exactly that, my opinions.

[Randall Klein]

Well, RLR, it's been a long journey from tech that demanded correct dash emblems for car claimed...'68 doors on a '67?, been done multiple times (vent windows, side marker lights etc, very obvious in ND); also, been about 10-15 years since '72 Nova won _____, after teching as a '68....not much difference, but the slippery slope just gets steeper; couple of wierdo FWD combos also have slid through in wrong classes, dropping from top qualifier positions to lower in the pack....no dog in this fight, but this is not new

[RLR]

[QUOTE=Travis Miller;35285]
NHRA now accepts the 426 Hemi with single 4-bl carb for Stock. At 430 refactored horsepower a car would weigh 3610 for A/SA. It is shown as an aluminum frontend combination. The "NASCAR" version used 4 headlights instead of the dragrace version that only had two.

Travis
Thanks for talking me down off the ledge. My selective memory vaguely recalls the acceptance of this 4 barrel combination not too long ago. It's a beautiful car and I'll be interested to see if it's ever competitive. At 430 hp you'd have to add so much ballast that it might actually hook up, even with that behemoth weighing down the wrong end of the car.

Also, I fondly remember the days when trim packages, options and emblems all had to be purely stock to be legal, and I have sadly watched those standards erode over the years. Like the wrinkles on my face, there's not much to be done about it now.

So ... my sincere apologies to the NHRA tech department. I wrongly accused before I had all the facts. Mea Culpa.

[Oldtimer]

I do not agree with the hood scoop, no cars in NASCAR had hood scoops and I am sure that can be proved. Jeff, Jerry Stein has the carb and intake you are referring too. If you want to contact him email me at L88BOB@aol.com

[Adger Smith]

Way to go Jeff, If I was building one of those Nascar Hemi's I would want a hood scoop too. If they were availaible why didn't the "King" & his court use them?
So much for the Nascar Hemis having hood scoops. I think there is a Dodge & Plymouth in that picture.
Try this link too:
http://cgi.ebay.com/RICHARD-PETTY-19...QQcmdZViewItem

[Adger Smith]

Check out: http://www.cottonowens.com/ Some good ink there about the Nascar Hemis. The photo link doesn't show any hood scoops on the # 6 David Pearson/ Owens Hemi cars.
http://www.cottonowens.com/photos.html

[greg fulk]

Travis you going to be @ Indy on thur.? I have several questions for you......you may want to look @ 80-Z28 SS info....(please)............& to everybody else see ya @ indy!!