Removing Decals

Joey Bohannon · 02-24-2012, 06:27 PM

I would use a hair dryer before the heat gun, you can bubble paint with a heat gun with no problem at all. A hair dryer is without a doubt your safest bet. I use regular gasoline for glue removal and have done it on hundreds of cars over the years. If you have static electricity issues in your area use the wd40, but be prepared to be patient. I have never had an issue with using the gas but I am also very cautious when using it. It will not hurt your paint......least it never has hurt anything i've used it on.

Joe Bohannon
A Plus Signs and Screen Printing
502-797-1352

02-24-2012, 06:27 PM	#18
Joey Bohannon Member Join Date: Jul 2002 Posts: 103 Likes: 1 Liked 61 Times in 22 Posts	Re: Removing Decals I would use a hair dryer before the heat gun, you can bubble paint with a heat gun with no problem at all. A hair dryer is without a doubt your safest bet. I use regular gasoline for glue removal and have done it on hundreds of cars over the years. If you have static electricity issues in your area use the wd40, but be prepared to be patient. I have never had an issue with using the gas but I am also very cautious when using it. It will not hurt your paint......least it never has hurt anything i've used it on. Joe Bohannon A Plus Signs and Screen Printing 502-797-1352

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode