2012 Rules Are Posted

[butch8908]

Originally Posted by jmcarter

Agree with you but some would be mad about being in a lower class even if it's the same weight break...

The camera/video rights section caught my attention, as well as substance abuse policy now being more in line with what most employees working for a company already abide by.

Stock still 1955 or newer to put that BS to bed.

http://www.nhra.com/UserFiles/file/2...Amendments.pdf

Where in the rules does it talk about the camera/video right? I'm an amateur photographer that takes a lot of Sportsman pictures and gives them away to the drivers. I'd like to know if I have any rights/
Butch

[jmcarter]

Originally Posted by butch8908

Where in the rules does it talk about the camera/video right? I'm an amateur photographer that takes a lot of Sportsman pictures and gives them away to the drivers. I'd like to know if I have any rights/
Butch

See page 58 of the amendments, apparently NHRA has rights to video taken....

[Toby Lang]

Originally Posted by jmcarter

See page 58 of the amendments, apparently NHRA has rights to video taken....

I believe that has always been the case.


-Toby

[james schaechter]

So what are the stocker BB and AA indexes then? 10.35 10.05? I didn't see anything posted. Maybe I missed it.

[Larry Hill]

So what class will Bill Hawk's new car "Fit"?

What a Joke

[7423]

SECTION 10A: STOCK CARS, ENGINE: 1, ROCKER ARMS (Page 5)

"Aftermarket rocker arm permitted. Either adjustable pushrods or adjustable OEM rocker arms permitted on any application, but not both. "

They really go to great lengths to spell out their rules changes so all can understand them.
Is this for real?
Is that it?
Really?
I think every racer with a stock # should call the tech dept at the same time and ask for an explaination.

[FED 387]

I can't imagine that a Super Mod in Super Stock CAN have angle plug heads and that a Super Mod in Comp CANNOT have them--no logic there----as for roller rockers bet its gonna be OEM location and ratios ---No T&D/Jesel shaft style rocker systems UNLESS that style is OEM (Mopar,etc)

[Robbie H]

Originally Posted by Larry Hill

So what class will Bill Hawk's new car "Fit"?

What a Joke

Dont worry Larry it's not goin anywhere... A B C . Last week at 500ft it went 9.48 141way heavy for A/SA with a slipping trans and a mild tune up. Goin tuesday with a new trans and I think if all goes right its easily gonna go .30's and if we take the weight out 9.20's are possible. We are gonna do what they call "slip trhough the cracks" as far as the new class structure so get to work on that Mopar lord knows Billy and the Cook Brothers did their homework....oh and its not the 1st time (Shelby) ! By the way I too have a 69 Camaro C/SA / B/SA car with a brand new Tilburg motor and its exactly 1 second slower...unreal. Just tryin to give these guys a little credit for building a class piece that hauls ### !

[boster]

Hudlow , tell them what you really think (LMAO) .See you next week for a cocktail or two

Bo

Robbie , BB or CC not A, B or C

[Jim Wahl]

Originally Posted by james schaechter

So what are the stocker BB and AA indexes then? 10.35 10.05? I didn't see anything posted. Maybe I missed it.

Indexes are never put in the rule book. I'm guessing there will be another announcement relative to the new indexes. Jim

.