Where are the lower class cars?

[GarysZ24]

Originally Posted by Dennis P Chapman

There hard to find Gary.

Yeah, sad but true I guess since M/T no longer makes them. I still have one descent 20X8 inch slick, but after it wears out, I'm resigned to DOT slicks, but I suppose with them I won't have to change them at the track, since those slicks don't hold air well for more than a couple of hours. Hopefully M/T's DOT slicks have descent bite, and can run with nearly 20-24psi of air pressure? Dennis, you have any insite on that?

[Dwight Southerland]

Billy Nees -

How about spitting out two or three of those $5K combinations to whet everybody's curiosity??

[Billy Nees]

Dwight, I'll spit out some "nuggets" if you'll do the same.

[Dwight Southerland]

Originally Posted by Billy Nees

Dwight, I'll spit out some "nuggets" if you'll do the same.

No problem. Just be aware that my offerings will probably be of the manually-shifted variety. We might have to put some limits on this to keep people from being overwhelmed, so how about starting with three each and the three all have to be different manufacturers? Considering the extra expense of the stuff required to make a stick shift car reliable, I might have to bump the budget to $7500 for those entries, but I can throw out some automatic cars, too.

[Michael Beard]

Since Billy' caveat was that the body was not included in the $5K, I'd say there's a bunch of good candidates out there. It's been discussed before, but take a look at the Chevy Cobalt. These things run mid-low 16's showroom stock and 200-300# heavy (2830 min in DF/S, pretty sure I scaled ours at over 3000# at Rockingham a few years back, before we traded it in on a real car), and I'm sure there's plenty of junk to take out of them. Tires, fuel, weight, and let it eat...

[Dwight Southerland]

At $5K without the cost of the car, there is a world of opportunities.

[Billy Nees]

Dwight, might I suggest that we keep it to rear drive, no turbos and no blowers? Want to flip to see who goes first? Should we start a new thread?

[Dennis P Chapman]

Originally Posted by GarysZ24

Yeah, sad but true I guess since M/T no longer makes them. I still have one descent 20X8 inch slick, but after it wears out, I'm resigned to DOT slicks, but I suppose with them I won't have to change them at the track, since those slicks don't hold air well for more than a couple of hours. Hopefully M/T's DOT slicks have descent bite, and can run with nearly 20-24psi of air pressure? Dennis, you have any insite on that?

Gary
No I never tried them I found a new set of slicks at a speed shop in tenn last set they had. So as long as my son does need them for his car I am good for both cars for now. If you get any info on them let me know.

[Michael Beard]

Polhill told me that Avon (a sister company to M/T) makes a 19.5" road race tire.

Gary - I've run my tires down around 13psi with much more success. We tried higher pressure, but it wasn't consistent. With my "big boy" 22x8-13's, it likes 12psi. Bigger tire with a smaller rim actually gives it some sidewall to work with.

[GarysZ24]

Originally Posted by Michael Beard

Polhill told me that Avon (a sister company to M/T) makes a 19.5" road race tire.

Gary - I've run my tires down around 13psi with much more success. We tried higher pressure, but it wasn't consistent. With my "big boy" 22x8-13's, it likes 12psi. Bigger tire with a smaller rim actually gives it some sidewall to work with.

Thanks Michael, I'll have to research that road race tire...although I'm trying to get into a tire that I don't need to change over to at the track since my trailer is high enough that I need more ground clearance when loading/unloading the car to keep my ground effects from scraping the ramps. Perhaps some longer ramps (with no slots inbetween the cross bars for my tires to drop into) could help that? Plus those small slicks don't travel well, and they don't even hold air for much more than 4hrs., w/o tubes

With the low sidewall that the 20x6x14's, and 20x8x14's have, I'd be nervous to run that low of air pressure. However, running with 20psi, I've carded (with a decent burnout) 1.96-1.98 60fts, which is great for my car...I guess I could next try 18psi, but w/o tubes in my tires, I'll be leery of that low of a pressure? I'm glad to know it works with the 22's, I'll have to keep that in mind if/when I make the switch to the 22x8x14 dot's....thanks for the tip Michael....