|
|
![]() |
#1 |
Junior Member
Join Date: Feb 2011
Posts: 15
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
That looks a little low for me...but like you said, I could get some spacers. I talked with Santhuff on the phone and he advised me to just cut the flats off of what I have. I will give that a shot. Thanks for the post and the picture.
|
![]() |
![]() |
![]() |
#2 |
Member
Join Date: Feb 2009
Posts: 244
Likes: 1
Liked 7 Times in 6 Posts
|
![]()
Cutting springs might hurt the stored energy capability of the spring. I'd go with spacers if you want the most you can get out of the springs. I know a racer that heats a tall spring to get the ride height he wants. That's a tricky process and something that I'd never attempt. Good luck with whatever you do.
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|