Cubic Inch/Weight Break for SS/CM and SS/DM

Tracy Robbins · 05-08-2009, 11:16 AM

You don't add 170 lbs for the driver for the modified classes. Actually, it's just the opposite if you run an automatic transmission you can deduct 5 % from the total. In your example it would be 300 x 9.5 = 2850 x .95 = 2708 which I think would round up to 2710. Hope this helps.

Smitty · 05-08-2009, 11:47 AM

Quote:

Originally Posted by Tracy Robbins

You don't add 170 lbs for the driver for the modified classes. Actually, it's just the opposite if you run an automatic transmission you can deduct 5 % from the total. In your example it would be 300 x 9.5 = 2850 x .95 = 2708 which I think would round up to 2710. Hope this helps.

Thanks Tracy, it clears it for me I really appreciate it.

Smitty

05-08-2009, 11:16 AM	#1
Tracy Robbins Senior Member Join Date: Dec 2001 Location: Youngsville, NC Posts: 846 Likes: 3 Liked 25 Times in 11 Posts	Re: Cubic Inch/Weight Break for SS/CM and SS/DM You don't add 170 lbs for the driver for the modified classes. Actually, it's just the opposite if you run an automatic transmission you can deduct 5 % from the total. In your example it would be 300 x 9.5 = 2850 x .95 = 2708 which I think would round up to 2710. Hope this helps. __________________ Tracy Robbins SS 9766

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode