Turbo 350 Fluid Capacity

Joe DeMarzo · 01-23-2009, 05:07 PM

8 quarts, start with 7 and check and recheck

Kent Hanley · 01-23-2009, 09:59 PM

Heads up on the Lokar dipstick. I had problems reading mine as well until Trans man Jack Sepanik came over and use a piece of sand paper on it. This helped the fluid stick and I found it much easier to read. I also suggest you check the length of the dipstick by taking the pan down and making sure. I found mine was off a little.

Hope this helps

Kent

01-23-2009, 05:07 PM	#1
Joe DeMarzo Senior Member Join Date: Oct 2002 Location: Mahopac, NY Posts: 668 Likes: 49 Liked 121 Times in 11 Posts	Re: Turbo 350 Fluid Capacity 8 quarts, start with 7 and check and recheck __________________ Joe DeMarzo 1317 STK

01-23-2009, 09:59 PM	#2
Kent Hanley Member Join Date: Mar 2007 Posts: 130 Likes: 149 Liked 0 Times in 0 Posts	Re: Turbo 350 Fluid Capacity Heads up on the Lokar dipstick. I had problems reading mine as well until Trans man Jack Sepanik came over and use a piece of sand paper on it. This helped the fluid stick and I found it much easier to read. I also suggest you check the length of the dipstick by taking the pan down and making sure. I found mine was off a little. Hope this helps Kent

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode