1985 Mustang HB GT/MA .90 under car

RJ Sledge · 04-24-2024, 06:47 PM

289 Mercury 223 hp combo, Bob Fasio Autolite 4100 1.12, Coan convertor just freshened UCC 7", Motor has 20 passes since freshened by Jimmy Bridges originally built by Jim Kuntz, AFR aluminum heads with hollow stem valves Ferrera, Jesel rockers, Comp cam, Super Victor Edelbrock, SVO 4 bolt block, 4.065 bore, roller cam bearings, Schumann oil pump, Canton oil pan, 9" aluminum 3d member, 35 spline Moser rifle drilled axles with profile ends, 35 spline spool, 5.29 R&P, Turbo Action shifter, 2.92 low gear rollerized C4, trans cooler, Trans blanket, Goodyear 9x30 rear and Goodyear 28' front runners, Weld wheels, Kirkey seat, Roll bar with swing out, 5 gallon aluminum fuel cell, TeamZ subframe connectors, TeamZ anti rollbar, and rear upper and lower control arms, QA1 coil overs rear, Strange front struts, O2 shifter with Digital Delay control, most of items are less than a year old. Car is nice no rust, new carpet throughout. PM me for contact number and more info and pic's.
Serious inquires please.

Ran .92 under 10.277/130.20 Belle Rose Div 4 points race and 10.445/127.50 Thunder Valley Div 4 points race.
Car is available in Jun 2024 after Dallas Double.

Have original build sheet from Kuntz& Co.

$29,500.00

Thanks
RJ

04-24-2024, 06:47 PM	#1
RJ Sledge Senior Member Join Date: Jun 2007 Posts: 761 Likes: 384 Liked 266 Times in 86 Posts	1985 Mustang HB GT/MA .90 under car 289 Mercury 223 hp combo, Bob Fasio Autolite 4100 1.12, Coan convertor just freshened UCC 7", Motor has 20 passes since freshened by Jimmy Bridges originally built by Jim Kuntz, AFR aluminum heads with hollow stem valves Ferrera, Jesel rockers, Comp cam, Super Victor Edelbrock, SVO 4 bolt block, 4.065 bore, roller cam bearings, Schumann oil pump, Canton oil pan, 9" aluminum 3d member, 35 spline Moser rifle drilled axles with profile ends, 35 spline spool, 5.29 R&P, Turbo Action shifter, 2.92 low gear rollerized C4, trans cooler, Trans blanket, Goodyear 9x30 rear and Goodyear 28' front runners, Weld wheels, Kirkey seat, Roll bar with swing out, 5 gallon aluminum fuel cell, TeamZ subframe connectors, TeamZ anti rollbar, and rear upper and lower control arms, QA1 coil overs rear, Strange front struts, O2 shifter with Digital Delay control, most of items are less than a year old. Car is nice no rust, new carpet throughout. PM me for contact number and more info and pic's. Serious inquires please. Ran .92 under 10.277/130.20 Belle Rose Div 4 points race and 10.445/127.50 Thunder Valley Div 4 points race. Car is available in Jun 2024 after Dallas Double. Have original build sheet from Kuntz& Co. $29,500.00 Thanks RJ Last edited by RJ Sledge; 04-30-2024 at 09:29 AM.