Randy Mans DQ?

[SSDiv6]

Originally Posted by Angelo DiTocco

The roof panels on this generation hard-top (1994-2002) Firebirds and Camaros are plastic / fiberglass from the factory and are glued on with an adhesive - they are not steel and never were - be careful with the assumptions..... They are also not easy to replace.
That can happen to anybody, can we just hope that the guy's car is ok?

I don't know if any aftermarket companies are making a repro but I do now they are not available from the factory nor have they been for a very long time. I tried finding one a few years ago and had no luck. The only option is to get one from a donor car and to get it off you have to use fishing line or piano wire, work it under the panel, and slice through the adhesive. It can't be peeled off with a putty knife.

Angelo is correct.

Depending on the year, both the roof and sail panels are either thermoplastic or fiberglass and GM discontinued them years ago.
When you go to the wrecking yard and try to remove them, it is worse than removing a windshield and they warp or get damaged. The OEM factory pieces were also defective and would bubble due to an issue with the epoxy and materials.

The aftermarket replacements for both the roof and sail panels are either fiberglass or carbon fiber.