|
09-27-2022, 09:10 AM | #1 |
Member
Join Date: Dec 2014
Location: Perry, GA
Posts: 330
Likes: 11
Liked 239 Times in 90 Posts
|
305 parts
416 heads pac1409x, stainless int 184, nitrided exh 150, studs/guideplates basic valve job, nothing major, 5 passes on valves and springs. $800
450 heads bare but have been worked, older work but decent $400 Bullet "latest" 357/390 cam nitrided 3 passes after back from Bullet Bullet solid lifters 3 passes $250 for both SOLD Venolia dish pistons 3.780 bore 1.2mm total seal rings 10 passes, top ring spacers, New set of top rings(just paid $400) not installed or filed, Eagle steel rods new 10 passes ago $800 rods/pistons/rings GM cast crank, 3.493 worked, ready to go, 10 passes $200 Deano Quadrajet was built for 69 350/255 engine $400 SOLD TA converter 200 metric was built for 69 350/255 2 passes $400 SOLD Would rather not ship crank or heads, may can deliver to Orlando Divisonal Last edited by jamie2370; 09-28-2022 at 09:33 AM. Reason: sold parts |
Liked |
|
|