Fairmont U/S Build AKA Craigslist Racer

Shadylane · 08-12-2017, 05:26 PM

Well I didn't make ABQ to test. I tested on a remote backroad 2 weeks ago and smoked the clutch due to my inexperience and other issues. The car runs well, stops and steers like it should, transmission shifts perfect. Just some driver/builder problems. Shipped the clutch back to Robb, he did a quick turn around on it and is on the way back to me.
As per Sean Marconette (thanks buddy) and Robb I installed a later Fox Mustang pedal assembly, Steeda clutch quadrant, firewall cable adjuster and cable. Also added a 1/4 spacer between the bellhousing and block. All of this should give me plenty of clearance between the t/o and pressure plate fingers.
We will try again next weekend if all goes well.

08-12-2017, 05:26 PM	#11
Shadylane Member Join Date: Apr 2009 Location: Farmington, New Mexico Posts: 201 Likes: 257 Liked 166 Times in 50 Posts	Re: Fairmont U/S Build AKA Craigslist Racer Well I didn't make ABQ to test. I tested on a remote backroad 2 weeks ago and smoked the clutch due to my inexperience and other issues. The car runs well, stops and steers like it should, transmission shifts perfect. Just some driver/builder problems. Shipped the clutch back to Robb, he did a quick turn around on it and is on the way back to me. As per Sean Marconette (thanks buddy) and Robb I installed a later Fox Mustang pedal assembly, Steeda clutch quadrant, firewall cable adjuster and cable. Also added a 1/4 spacer between the bellhousing and block. All of this should give me plenty of clearance between the t/o and pressure plate fingers. We will try again next weekend if all goes well. Attached Thumbnails