Hey, I need a cam (or two)!

Billy Nees · 05-04-2021, 07:48 AM

I know that everyone is having trouble getting anything right now but I'm looking for a Comp #113200 (2 cams) for the Cavalier. I haven't been able to find one and the soonest delivery date that I've been able to get is the middle of July! Now this isn't some custom grind, it's a catalog cam. Doesn't anyone, anywhere have these cams in-stock or on a shelf that they would like to sell?

Frank Castros · 05-04-2021, 10:41 AM

Billy,
Try Speedway Motors.

FED 387 · 05-04-2021, 12:56 PM

try Scoggin Dickey--- maybe Speedway ---and for a long shot Bruno Massel might have something just laying around but probably too small for anything the use---FED 387

chris ok · 05-04-2021, 02:09 PM

Try
Competition products too.

SSDiv6 · 05-04-2021, 06:01 PM

Billy,

Check with the following companies below. AT one time when I was involved with building off road and Trophy Truck engines, we had started working on the Ecotec 2.2 sealed and modified engines for off road desert racing. The companies shown below either had their own design or camshafts from Comp and Crane on the shelf.

https://www.skunkworksports.com/

http://howellautomotive.com/index.aspx

https://zzperformance.com/

https://www.custombuiltmotors.com/

http://www.jbodyperformance.com/

http://www.danzioperformance.com/

HR9121 · 05-04-2021, 07:19 PM

Billy I can't believe you don't have a couple laying around somewhere, check the kitchen cabinets!

SSDiv6 · 05-05-2021, 05:31 PM

Billy,
Skunkworks just posted in FB that they have a batch of new 2.2 camshafts.

https://www.facebook.com/32806493457...9935001387502/

Billy Nees · 05-05-2021, 06:38 PM

I just ordered cams! They'll (hopefully) be here Tuesday! Thanks SSDiv6 and everyone else!

05-04-2021, 10:41 AM	#2
Frank Castros VIP Member Join Date: Nov 2001 Location: The Lowcountry. Posts: 2,964 Likes: 2,571 Liked 2,715 Times in 956 Posts	Re: Hey, I need a cam (or two)! Billy, Try Speedway Motors.

05-04-2021, 12:56 PM	#3
FED 387 VIP Member Join Date: Jun 2006 Posts: 3,418 Likes: 523 Liked 332 Times in 180 Posts	Re: Hey, I need a cam (or two)! try Scoggin Dickey--- maybe Speedway ---and for a long shot Bruno Massel might have something just laying around but probably too small for anything the use---FED 387

05-04-2021, 02:09 PM	#4
chris ok Senior Member Join Date: Jul 2002 Location: Long Island, New york Posts: 592 Likes: 131 Liked 46 Times in 29 Posts	Re: Hey, I need a cam (or two)! Try Competition products too.

05-04-2021, 06:01 PM	#5
SSDiv6 VIP Member Join Date: Feb 2003 Location: Glendale, Arizona Posts: 3,043 Likes: 712 Liked 1,577 Times in 581 Posts	Re: Hey, I need a cam (or two)! Billy, Check with the following companies below. AT one time when I was involved with building off road and Trophy Truck engines, we had started working on the Ecotec 2.2 sealed and modified engines for off road desert racing. The companies shown below either had their own design or camshafts from Comp and Crane on the shelf. https://www.skunkworksports.com/ http://howellautomotive.com/index.aspx https://zzperformance.com/ https://www.custombuiltmotors.com/ http://www.jbodyperformance.com/ http://www.danzioperformance.com/

05-04-2021, 07:19 PM	#6
HR9121 Live Reporter Join Date: Jan 2011 Location: New Bern, NC Posts: 3,467 Likes: 146 Liked 3,363 Times in 731 Posts	Re: Hey, I need a cam (or two)! Billy I can't believe you don't have a couple laying around somewhere, check the kitchen cabinets! __________________ James Williamson W200 J/SA. SS/JA

05-04-2021, 07:48 AM	#1
Billy Nees VIP Member Join Date: Oct 2002 Location: On a hilltop in Pa. Posts: 4,487 Likes: 3,588 Liked 7,688 Times in 1,732 Posts	Hey, I need a cam (or two)! I know that everyone is having trouble getting anything right now but I'm looking for a Comp #113200 (2 cams) for the Cavalier. I haven't been able to find one and the soonest delivery date that I've been able to get is the middle of July! Now this isn't some custom grind, it's a catalog cam. Doesn't anyone, anywhere have these cams in-stock or on a shelf that they would like to sell? __________________ Billy Nees 1188 STK, SS I'm not spending 100K to win 2K

05-05-2021, 05:31 PM	#7
SSDiv6 VIP Member Join Date: Feb 2003 Location: Glendale, Arizona Posts: 3,043 Likes: 712 Liked 1,577 Times in 581 Posts	Re: Hey, I need a cam (or two)! Billy, Skunkworks just posted in FB that they have a batch of new 2.2 camshafts. https://www.facebook.com/32806493457...9935001387502/

05-05-2021, 06:38 PM	#8
Billy Nees VIP Member Join Date: Oct 2002 Location: On a hilltop in Pa. Posts: 4,487 Likes: 3,588 Liked 7,688 Times in 1,732 Posts	Re: Hey, I need a cam (or two)! I just ordered cams! They'll (hopefully) be here Tuesday! Thanks SSDiv6 and everyone else! __________________ Billy Nees 1188 STK, SS I'm not spending 100K to win 2K