|
![]() |
#1 |
Member
Join Date: Oct 2007
Posts: 241
Likes: 1
Liked 19 Times in 2 Posts
|
![]()
Should be interesting.
__________________
Mike Ficacci Stk 1010 Last edited by MikeFicacci; 11-21-2011 at 06:40 PM. |
![]() |
![]() |
![]() |
#2 |
VIP Member
Join Date: Dec 2004
Posts: 1,200
Likes: 0
Liked 271 Times in 53 Posts
|
![]()
SECTION 10A: STOCK CARS, ENGINE: 1, ROCKER ARMS (Page 5)
Aftermarket rocker arm permitted. Either adjustable pushrods or adjustable OEM rocker arms permitted on any application, but not both. Can we get a translation on this please. |
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Feb 2002
Posts: 152
Likes: 0
Liked 19 Times in 6 Posts
|
![]()
AAA/SA? ... CC/SA? ... would it have been that difficult to just reorder the classes from A on down?
|
![]() |
![]() |
![]() |
#4 |
Member
Join Date: Dec 2003
Location: Houston
Posts: 311
Likes: 29
Liked 31 Times in 16 Posts
|
![]()
OK, roller rockers are allowed. ANY ratio allowed?
|
![]() |
![]() |
![]() |
#5 | |
VIP Member
Join Date: Dec 2008
Location: Richmond Hill GA (and Port Ludlow WA)
Posts: 4,293
Likes: 2,368
Liked 3,169 Times in 970 Posts
|
![]() Quote:
The camera/video rights section caught my attention, as well as substance abuse policy now being more in line with what most employees working for a company already abide by. Stock still 1955 or newer to put that BS to bed. http://www.nhra.com/UserFiles/file/2...Amendments.pdf
__________________
Jim Carter 2340 Super Stock 2340 SST/2340 Stock Set another place at the table |
|
![]() |
![]() |
![]() |
#6 | |
VIP Member
Join Date: Jan 2005
Location: Where the Green Grass Grows, AL
Posts: 2,375
Likes: 0
Liked 3 Times in 3 Posts
|
![]() Quote:
__________________
Chad Rhodes 2113 I/SA |
|
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: Nov 2005
Location: NJ
Posts: 503
Likes: 130
Liked 451 Times in 77 Posts
|
![]()
5.5 lb Super Stock class…
I found nothing in there about diapers or belly pans on Super Stock cars... |
![]() |
![]() |
![]() |
#8 |
Senior Member
Join Date: Dec 2001
Location: NY, NY
Posts: 750
Likes: 175
Liked 189 Times in 48 Posts
|
![]()
Shuhhsh - don't give em any ideas !
__________________
Angelo DiTocco '98 Firebird SS/HA '98 Firebird B/SA |
![]() |
![]() |
![]() |
#9 |
Veteran Member
Join Date: May 2006
Location: Murfreesboro TN
Posts: 5,105
Likes: 1,561
Liked 1,788 Times in 408 Posts
|
![]()
I have it on good authority that the rule will be amended again soon. As it is now, they did not even specify stock ratio or stock configuration. As open as it is right now, by the letter, we could go out and buy a set of Jesel or T&D shaft mounts in whatever ratio we wanted. After all, they bolt to a stock head.
![]() Of course, NHRA would say "just because we did not tell you that you cannot, does not mean that you can". ![]() I guess it is kind of cool, though. If your Stock Eliminator combination is factored at 500HP, you can run AAA/S at 3170 with driver, on a 9" slick.
__________________
Alan Roehrich 212A G/S |
![]() |
![]() |
![]() |
#10 |
Senior Member
Join Date: Feb 2008
Location: Georgetown, Indiana (close to Louisville, KY)
Posts: 775
Likes: 530
Liked 230 Times in 106 Posts
|
![]()
Who will be the first 8 second stocker?
|
![]() |
![]() |
![]() |
|
|