Need Ford 8.8 gears

Rory McNeil · 06-23-2009, 12:37 PM

I need a set of 5.13 gears for a Ford 8.8 rearend, new or good used. Thanks. Rory (604) 589-6883

Sean Marconette · 06-24-2009, 06:26 PM

Rory,

I had a hard time even finding this one?
http://www.4wheelerssupply.com/catal...ducts_id/71196

Good luck.
Sean

FED 387 · 06-24-2009, 06:59 PM

Try Ron;s Machining Service in Michigan $210 each

Earle Holt · 06-24-2009, 07:57 PM

Rory =

Jawsgear.com has them for $179. These are the Motive gears that I run. The ring is back-cut so they are alot lighter than other gears I've used.

Earle

6031 stock · 06-24-2009, 08:48 PM

Rory that is what I run Motive back cut had no problem getting them

Rory McNeil · 06-25-2009, 01:41 AM

Thanks guys, the 5.13`s I was using until I broke the pinion this past weekend also had the back cut ring gear, I bought them from Moser 3 or 4 years ago. I found a set of Yukons locally, so I should be OK, but I will keep Jaws gear in mind and may buy another set of Motives for "next time". Earl, how long were your 5.13`s lasting for, with the stick?

06-23-2009, 12:37 PM	#1
Rory McNeil VIP Member Join Date: Jun 2007 Location: from Vancouver BC Canada, now in Nova Scotia Posts: 1,311 Likes: 314 Liked 1,102 Times in 301 Posts	Need Ford 8.8 gears I need a set of 5.13 gears for a Ford 8.8 rearend, new or good used. Thanks. Rory (604) 589-6883 __________________ NHRA 6390 STK M/S 85 Mustang

06-24-2009, 06:26 PM	#2
Sean Marconette Senior Member Join Date: Mar 2006 Posts: 977 Likes: 792 Liked 275 Times in 76 Posts	Re: Need Ford 8.8 gears Rory, I had a hard time even finding this one? http://www.4wheelerssupply.com/catal...ducts_id/71196 Good luck. Sean __________________ Sean Marconette 84 Mustang 5060 SS/N

06-24-2009, 06:59 PM	#3
FED 387 VIP Member Join Date: Jun 2006 Posts: 3,416 Likes: 522 Liked 330 Times in 178 Posts	Re: Need Ford 8.8 gears Try Ron;s Machining Service in Michigan $210 each

06-24-2009, 07:57 PM	#4
Earle Holt Member Join Date: Nov 2001 Posts: 194 Likes: 1 Liked 4 Times in 1 Post	Re: Need Ford 8.8 gears Rory = Jawsgear.com has them for $179. These are the Motive gears that I run. The ring is back-cut so they are alot lighter than other gears I've used. Earle __________________ Earle Holt 1055 Stock

06-24-2009, 08:48 PM	#5
6031 stock Junior Member Join Date: Feb 2009 Location: Maple Ridge B.C. Posts: 11 Likes: 0 Liked 0 Times in 0 Posts	Re: Need Ford 8.8 gears Rory that is what I run Motive back cut had no problem getting them __________________ Marshall Greenwell K/SA

06-25-2009, 01:41 AM	#6
Rory McNeil VIP Member Join Date: Jun 2007 Location: from Vancouver BC Canada, now in Nova Scotia Posts: 1,311 Likes: 314 Liked 1,102 Times in 301 Posts	Re: Need Ford 8.8 gears Thanks guys, the 5.13`s I was using until I broke the pinion this past weekend also had the back cut ring gear, I bought them from Moser 3 or 4 years ago. I found a set of Yukons locally, so I should be OK, but I will keep Jaws gear in mind and may buy another set of Motives for "next time". Earl, how long were your 5.13`s lasting for, with the stick? __________________ NHRA 6390 STK M/S 85 Mustang