Small runner intake gaskets

[Ed McLawhorn Jr.]

Need recommendations for sbc small port intake gaskets. Specifically for 520 super stock port. I was using Mr. Gasket 100's and cutting for fit. No issues until they seem to be out of stock or discontinued. I can buy gasket material and cut one out, but was hoping for something close and minimize cut to fit. Thanks.

Ed

[Alan Roehrich]

FelPro once had a huge selection of small block Chevy intake gaskets.

[Tom Goldman]

Take a look at the SCE catalog. they have many different size and port shape SBC intake gaskets. plus their material is far better than the old MR Gasket material.

[Bob Gullett]

Originally Posted by Ed McLawhorn Jr.

Need recommendations for sbc small port intake gaskets. Specifically for 520 super stock port. I was using Mr. Gasket 100's and cutting for fit. No issues until they seem to be out of stock or discontinued. I can buy gasket material and cut one out, but was hoping for something close and minimize cut to fit. Thanks.

Ed

If you need a 1/8” gasket the 1245 felpro is a small port.

[prostockpete1]

Mr. Gasket offers sheets of intake gasket material ... Holley / Mr . gasket site shows # 77B & 77C part # .s

[Ed McLawhorn Jr.]

Thanks everyone. I?m looking at some sce gaskets. Not sure if they will fit the bill, time will tell. Worse case, I will buy gasket sheet and cut to fit. Hoping there was another option.

[Dirk Olson]

Send a gasket that you have fitted to your head to Cometic and they will reproduce that gasket with your P/N on it.

Ed I talked to Lance Line this past weekend and he said that you give him call he should have what you need at Line Performance in Wright Minn.

Dirk

[Ed McLawhorn Jr.]

Originally Posted by Dirk Olson

Send a gasket that you have fitted to your head to Cometic and they will reproduce that gasket with your P/N on it.

Dirk

Thanks Dirk. I had a friend call this afternoon and suggested same thing. That?s what he ended up doing.

[Jrh5220]

Originally Posted by Ed McLawhorn Jr.

Need recommendations for sbc small port intake gaskets. Specifically for 520 super stock port. I was using Mr. Gasket 100's and cutting for fit. No issues until they seem to be out of stock or discontinued. I can buy gasket material and cut one out, but was hoping for something close and minimize cut to fit. Thanks.

Ed

us the 1290 felpro.