Torqueflite to GM

Adger Smith · 09-23-2020, 09:56 PM

I have a customer that runs a 727 TqFlite and needs to change the input and Front pump to GM/PG. Who has the parts for this modification?

Rsmith38 · 09-24-2020, 08:04 AM

Don't Know about that But there are 904 transmissions with GM bolt patterns - were in AMC 80's vehicles with the 4 cyl GM motors.

Hacksaw · 09-24-2020, 08:06 AM

The Smith family, at Protrans or possibly A1 in Washington State.

jmcarter · 09-24-2020, 08:11 AM

Without a doubt, ProTrans in Waco, TX. BTW A-1 is in Portland.

Hacksaw · 09-24-2020, 04:27 PM

Quote:

Originally Posted by jmcarter

Without a doubt, ProTrans in Waco, TX. BTW A-1 is in Portland.

Unless A1 has moved, they are in Vancouver Wa.

jmcarter · 09-24-2020, 05:29 PM

Quote:

Originally Posted by Hacksaw

Unless A1 has moved, they are in Vancouver Wa.

You’re right, just across the mighty Columbia. Washingtonians would probably take offense at my error. Had them saved in my Google maps because whenever I go back west (this year the first in the last 10 I didn’t make it) I’ve got one of their converters I want them to adjust for me.

Mark Yacavone · 09-24-2020, 07:22 PM

Adger, I don't have your answer, but are you sure you want 17 spline, rather than 30
(T 350) ?

Dave Noll · 10-04-2020, 07:47 PM

Quote:

Originally Posted by jmcarter

BTW A-1 is in Portland.

Quote:

Originally Posted by Hacksaw

Unless A1 has moved, they are in Vancouver Wa.

Across the river in Vancouver

Adger Smith · 10-05-2020, 11:58 PM

Thanks Guys
Dave Smith and I talked him out of it.
Dave could do it, but there were a few catches and he had some, but not all the parts in Stock.
Thanks,
Appreciate all the input.
Adger Smith

09-23-2020, 09:56 PM	#1
Adger Smith VIP Member Join Date: Dec 2001 Location: Texarkana Ark/TX Posts: 2,446 Likes: 575 Liked 880 Times in 311 Posts	Torqueflite to GM I have a customer that runs a 727 TqFlite and needs to change the input and Front pump to GM/PG. Who has the parts for this modification? __________________ Adger Smith (Former SS)

09-24-2020, 08:04 AM	#2
Rsmith38 Member Join Date: Mar 2011 Posts: 186 Likes: 0 Liked 28 Times in 15 Posts	Re: Torqueflite to GM Don't Know about that But there are 904 transmissions with GM bolt patterns - were in AMC 80's vehicles with the 4 cyl GM motors.

09-24-2020, 08:06 AM	#3
Hacksaw Senior Member Join Date: Sep 2016 Posts: 884 Likes: 208 Liked 310 Times in 174 Posts	Re: Torqueflite to GM The Smith family, at Protrans or possibly A1 in Washington State.

09-24-2020, 08:11 AM	#4
jmcarter VIP Member Join Date: Dec 2008 Location: Richmond Hill GA (and Port Ludlow WA) Posts: 4,299 Likes: 2,388 Liked 3,184 Times in 973 Posts	Re: Torqueflite to GM Without a doubt, ProTrans in Waco, TX. BTW A-1 is in Portland. __________________ Jim Carter 2340 Super Stock 2340 SST/2340 Stock Set another place at the table

09-24-2020, 07:22 PM	#7
Mark Yacavone Veteran Member Join Date: Mar 2002 Location: Miles From Nowhere Posts: 7,818 Likes: 2,909 Liked 5,126 Times in 1,954 Posts	Re: Torqueflite to GM Adger, I don't have your answer, but are you sure you want 17 spline, rather than 30 (T 350) ? __________________ "We are lucky we don't get as much Government as we pay for." Will Rogers

10-05-2020, 11:58 PM	#9
Adger Smith VIP Member Join Date: Dec 2001 Location: Texarkana Ark/TX Posts: 2,446 Likes: 575 Liked 880 Times in 311 Posts	Re: Torqueflite to GM Thanks Guys Dave Smith and I talked him out of it. Dave could do it, but there were a few catches and he had some, but not all the parts in Stock. Thanks, Appreciate all the input. Adger Smith __________________ Adger Smith (Former SS)