|
|
01-10-2017, 10:34 PM | #1 |
Junior Member
Join Date: Jun 2016
Location: South Jersey
Posts: 57
Likes: 7
Liked 1 Time in 1 Post
|
Powerhorse Generators
Looking to upgrade to a quieter generator for this upcoming race season and came across Powerhorse units sold by Northern Tool. The specific one I'm interested in is the 3500 inverter. The advertised sound level seems to compare favorably with the higher priced brands and they are quite a bit cheaper, which kind of worries me.
Looking for some first hand opinions if anyone has owned or even seen one in action at the track. Thanks. |
01-11-2017, 08:41 AM | #2 |
VIP Member
Join Date: Mar 2010
Location: Newport News, VA
Posts: 1,438
Likes: 372
Liked 129 Times in 59 Posts
|
Re: Powerhorse Generators
I've been using the smaller version of the Powerhorse inverter-generator, the 2000-series for about 2 years and I'm very happy with it's performance, Marc.
It's very quiet, and I've been able to power my small compressor and battery-charger on less than one tank of fuel, so it's economical as well. It's due for a service over the winter, so I'll be headed back to Northern later this month for a filter and tune-up kit. One recommendation, and this goes for any small-engined equipment, is to use a fuel-additive designed to combat the destructive effects of the ethanol in in the fuel. Northern sells a product made by "Starbrite" which seems to work well, but I think Sta-bil also offers the same protection. If you have access to it, there are non-ethanol fuels available (VP's SEF is a great product, but a little more expensive). I think if you maintain your generator properly and always use clean, fresh fuel you'll be very happy with a Powerhorse generator.
__________________
Lew Silverman #2070 "The Wagon Master" N/SA |
01-11-2017, 03:06 PM | #3 |
Junior Member
Join Date: Jun 2016
Location: South Jersey
Posts: 57
Likes: 7
Liked 1 Time in 1 Post
|
Re: Powerhorse Generators
Thanks Lew...that's good to know. And I agree on the fuel stabilizer. I usually use the Lucas stuff and seems to work well.
|
01-11-2017, 05:22 PM | #4 |
VIP Member
Join Date: Mar 2007
Posts: 2,354
Likes: 558
Liked 1,702 Times in 520 Posts
|
Re: Powerhorse Generators
I only use non ethanol fuel in my small engine equipment. It has made a huge difference in the way they start and run. Luckily I have a gas station near the house that sells the non eth gasoline
__________________
Mike Pearson 2485 SS |
01-12-2017, 08:23 AM | #5 |
VIP Member
Join Date: Nov 2001
Location: Florida
Posts: 1,541
Likes: 34
Liked 137 Times in 51 Posts
|
Re: Powerhorse Generators
If interested in quieter, but affordable generators, I got a Champion 3500/4000 last year and it has worked flawlessly, aside from a cord break which was quickly replaced under warranty. I've had a couple of comments about how quiet it is and it starts on the first or second pull. They have a complete line to choose from, including with inverters.
http://www.championpowerequipment.co...ts/generators/ http://www.championpowerequipment.co...cts/inverters/
__________________
LOCOMOTION Racing Last edited by Myron Piatek; 01-12-2017 at 08:25 AM. |
01-12-2017, 10:56 AM | #6 |
VIP Member
Join Date: Apr 2003
Location: Tulsa, Oklahoma
Posts: 1,610
Likes: 3,492
Liked 704 Times in 305 Posts
|
Re: Powerhorse Generators
Champion has caught my attention as well. While built in China they are engineered in the US and have bigger presence in the U.S. than most.
One of their locations is in Wisconsin, which has made me wonder if there were any links to Waukesha Engines in their background. Bill |
|
|