|
|
07-16-2012, 11:14 AM | #1 |
Junior Member
Join Date: Jun 2012
Posts: 39
Likes: 0
Liked 0 Times in 0 Posts
|
#1stop install question
Where should I be trying to mount the electric part of it (solenoid), close to the stop or can it be on the firewall or a bracket nearby? Does anybody have any pics I could see.
It says it should be away from heat and or fuel spills. this is going on a BBC 70 Nova. Thanks in advance. |
07-16-2012, 11:57 AM | #2 |
VIP Member
Join Date: Feb 2006
Location: Dela-where?
Posts: 2,153
Likes: 1,060
Liked 1,740 Times in 551 Posts
|
Re: #1stop install question
sorry no pic. but i mounted mine right on the firewall. as close to stop as possible about a foot away. kept the hoses short and out of the way...
__________________
KEITH MAYERS 2 X somebody many X nobody |
07-16-2012, 04:52 PM | #3 |
Junior Member
Join Date: Mar 2010
Location: Bellville Texas
Posts: 14
Likes: 68
Liked 0 Times in 0 Posts
|
Re: #1stop install question
I mounted the solenoid to the baseplate. Mine is the 2 stage stop and it seems like back of the solenoid was slotted and fit on there perfectly. Just had to drill and tap the baseplate. The hoses going to the cylinders are less than 6" long. Very clean look. I'll try to get you a picture in the next day or so.
__________________
Ray Todd 4604 S/ST |
|
|