|
|
![]() |
#1 |
Senior Member
Join Date: Oct 2003
Location: candia, nh
Posts: 509
Likes: 57
Liked 221 Times in 72 Posts
|
![]()
I have a new stocker that has a brake pressure switch for launch control and I am trying to understand how it works and how to set it properly? I am just an old 2 step switch kind of guy (and am easily confused).
Any help is greatly appreciated! Text or call six03-78five-seven866 email: deanribeiro@comcast.net |
![]() |
![]() |
Liked |
![]() |
#2 |
VIP Member
Join Date: Dec 2001
Location: phoenix
Posts: 1,479
Likes: 63
Liked 700 Times in 278 Posts
|
![]()
Look up Folk race cars. They have one worked really well. They are in Illinois last i heard.
|
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Feb 2017
Location: Las Vegas, Nv
Posts: 837
Likes: 247
Liked 1,219 Times in 383 Posts
|
![]()
here is one.Does it look close?
Paul H |
![]() |
![]() |
![]() |
#4 |
Member
Join Date: Nov 2016
Location: Indianola Washington
Posts: 396
Likes: 0
Liked 450 Times in 145 Posts
|
![]()
Folk Race cars closed. The switch you want has an adjustable pressure Range 100 to 1000 PSI. 3 wires. Black wire is not used.
Recommend wiring power to it thru a 3rd gear micro switch. Power is removed to the BPS when in 3rd gear ( if a 3sp Auto) This will allow you to apply brakes at 1,000 and the 2 step will not be activated. Set up a LED light in the circuit so you know when the 2 step is powered up with right brake PSI Believe they are 200.00 or so. Steve Teeter Stk/SS 620 |
![]() |
![]() |
Liked |
![]() |
#5 | |
VIP Member
Join Date: Nov 2009
Location: Egg Harbor Township, NJ
Posts: 1,460
Likes: 1,405
Liked 4,335 Times in 494 Posts
|
![]() Quote:
![]() Last edited by Bobby Fazio; 07-17-2024 at 07:51 AM. |
|
![]() |
![]() |
![]() |
#6 |
Guest
Posts: n/a
|
![]()
I did that to my PP shifter Bobby, only activates in first gear. I mounted to the right side. I?ll take pics when I get home. Same brake switch too..
|
![]() |
Liked |
![]() |
#7 | |
VIP Member
Join Date: Nov 2009
Location: Egg Harbor Township, NJ
Posts: 1,460
Likes: 1,405
Liked 4,335 Times in 494 Posts
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#8 |
Guest
Posts: n/a
|
![]() |
![]() |
Liked |
![]() |
#9 |
Member
Join Date: Nov 2016
Location: Indianola Washington
Posts: 396
Likes: 0
Liked 450 Times in 145 Posts
|
![]()
There should be a micro switch that PPP can supply that mounts opposite side of the Netural safety switch. It's triggered by the same rod. No external bracket and switch required then . Very clean and they provide a screw on connector wiring harness same as the Safety switch hasness .
|
![]() |
![]() |
Liked |
![]() |
#10 |
Member
Join Date: Sep 2008
Posts: 138
Likes: 3
Liked 104 Times in 37 Posts
|
![]()
Just curious how much brake pressure do you use at the starting line? I have seen a lot of data and have never seen brake pressure over 4-500 psi (on 160 mph plus cars). I would think anymore than that would lock em up bad at the stripe.....
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|