Motive Ring and Pinion gears?

tstickff · 02-12-2018, 06:18 PM

Who has used them and are they ok to use? Dana 60 application being used for Super Stock

Thanks
Tim

Greg Hill · 02-12-2018, 08:43 PM

I put one in Andrew’s car last year and I have to say it looked better than any other ring and pinion I’ve installed over 30 plus years.

Floyd Staggs · 02-12-2018, 08:59 PM

I spit out a set of Richmond street years after a few years and the guy that helps me on the car doesn't think anything about spending my money. He redid my 9" with Motive Pro gears and they did look great and are working well. I launch at 4000 off a trans brake on a 10.5 tire. We just switched last year to a Alston Fab9 narrowed housing and a 13.5 tire and the gears looked absolutely perfect so we just used them again with a new spool and 35 spline narrow axles. It was a good upgrade.

Dave Turner · 02-12-2018, 09:11 PM

Great product... Made in Italy.

Jim Wahl · 02-12-2018, 09:25 PM

Quote:

Originally Posted by Dave Turner

Great product... Made in Italy.

Seriously?! Well, at least they're not made in China! Jim

.

BRETV · 02-12-2018, 10:20 PM

I run them in my superstocker, so far so good

Bret Velde
2003 SS/LA

tstickff · 02-12-2018, 10:41 PM

Thanks everyone!

Chris DeGidio · 02-12-2018, 10:50 PM

I used their 3.90 gear set in my Dana 60 and it's been flawless.

Ed Wright · 02-13-2018, 11:46 AM

They have lasted well in my Moser 12 bolt.

CMcAllister · 02-13-2018, 01:48 PM

We've used them in all kinds of rears. They are one of the few we will still use. Always set up nice. Get a nice pattern. Reasonably quiet and live. Recommended.

02-12-2018, 06:18 PM	#1
tstickff Member Join Date: Mar 2009 Posts: 469 Likes: 308 Liked 561 Times in 138 Posts	Motive Ring and Pinion gears? Who has used them and are they ok to use? Dana 60 application being used for Super Stock Thanks Tim

02-12-2018, 08:43 PM	#2
Greg Hill VIP Member Join Date: May 2006 Location: Louisville , KY Posts: 1,995 Likes: 68 Liked 279 Times in 68 Posts	Re: Motive Ring and Pinion gears? I put one in Andrew’s car last year and I have to say it looked better than any other ring and pinion I’ve installed over 30 plus years. __________________ Greg Hill 4171 STK

02-12-2018, 08:59 PM	#3
Floyd Staggs VIP Member Join Date: Feb 2006 Location: Cucamonga, CA Posts: 1,522 Likes: 152 Liked 229 Times in 99 Posts	Re: Motive Ring and Pinion gears? I spit out a set of Richmond street years after a few years and the guy that helps me on the car doesn't think anything about spending my money. He redid my 9" with Motive Pro gears and they did look great and are working well. I launch at 4000 off a trans brake on a 10.5 tire. We just switched last year to a Alston Fab9 narrowed housing and a 13.5 tire and the gears looked absolutely perfect so we just used them again with a new spool and 35 spline narrow axles. It was a good upgrade. __________________ Floyd Staggs 787 SST

02-12-2018, 09:11 PM	#4
Dave Turner VIP Member Join Date: Oct 2005 Location: Schomberg, ON, Canada Posts: 1,222 Likes: 1,606 Liked 364 Times in 138 Posts	Re: Motive Ring and Pinion gears? Great product... Made in Italy. __________________ Dave Turner SS/GT #1153

02-12-2018, 10:20 PM	#6
BRETV Senior Member Join Date: Oct 2003 Posts: 567 Likes: 4,151 Liked 776 Times in 199 Posts	Re: Motive Ring and Pinion gears? I run them in my superstocker, so far so good Bret Velde 2003 SS/LA

02-12-2018, 10:41 PM	#7
tstickff Member Join Date: Mar 2009 Posts: 469 Likes: 308 Liked 561 Times in 138 Posts	Re: Motive Ring and Pinion gears? Thanks everyone!

02-12-2018, 10:50 PM	#8
Chris DeGidio Member Join Date: Jun 2007 Posts: 364 Likes: 8 Liked 2 Times in 2 Posts	Re: Motive Ring and Pinion gears? I used their 3.90 gear set in my Dana 60 and it's been flawless. __________________ Nautilus Racing

02-13-2018, 11:46 AM	#9
Ed Wright Veteran Member Join Date: Mar 2005 Location: Sand Springs, OK Posts: 8,132 Likes: 896 Liked 390 Times in 170 Posts	Re: Motive Ring and Pinion gears? They have lasted well in my Moser 12 bolt. __________________ Ed Wright 4156 SS/JA

02-13-2018, 01:48 PM	#10
CMcAllister Senior Member Join Date: Sep 2006 Location: Fulton County, PA Posts: 614 Likes: 16 Liked 920 Times in 259 Posts	Re: Motive Ring and Pinion gears? We've used them in all kinds of rears. They are one of the few we will still use. Always set up nice. Get a nice pattern. Reasonably quiet and live. Recommended.