Comp/Super Stock Engine Parts

MANSRACING · 11-15-2014, 07:26 PM

SBC CNC Bowtie Block: 4.030 Bore, 55mm babbit cam bearings, 4-bolt billet caps, Jesel Key-lifter bushings, all machine work done by Weston Machine, Fresh hone $2,500 SOLD

Bryant Crankshaft: 2.980" Stroke, Honda rod journals, 283 Main journals, MINT condition $1,600

.

Bullet Cam: 55mm, record setting SS/CS camshaft $250

Pistons, Rods, Pins: BME 4.029 Bore, Rebco Lightened, .7mm ring grooves. GRP Aluminum 6.00" Long, Honda journal, .927 Pin, PPP Casidium coated Titanium wrist Pins .927" diameter x 2.484" Long $500

Calico Coated Bearings: 350 Block journal to 283 crank journal p/n MS1110H $150

Package deal for everything ABOVE to build SS/CS legal shortblock:. $4,600.00

Jesel Keyway Lifters: .937" diameter, .850" diameter wheel, all +.150" Offset $500 SOLD

Dart Iron SBC Castings: SS/CS Approved, brand new in the box set of heads ready for porting. Special ordered with Ductile Iron Exhaust seats, and 5/16" guides $800 for the pair

BRE 750cfm SS/BS-CS Legal 4150 Holley Carb $750

Richmond 9" Ford Gear Sets, Small Pinion on each:
6.20 Pro Gear $100 SOLD
6.33 NEW $150
6.50 Pro, 2 Runs $100 SOLD

See RacingJunk Ad #182325386 for photos

Call Randy @ 612.306.5387 with any questions

tallison55 · 11-16-2014, 11:10 PM

Randy,
Interested in your block and parts call me in the morning .
Thanks ,Terry Allison 724 462 6444

11-16-2014, 11:10 PM	#2
tallison55 Junior Member Join Date: Mar 2007 Posts: 43 Likes: 0 Liked 0 Times in 0 Posts	Re: Comp/Super Stock Engine Parts Randy, Interested in your block and parts call me in the morning . Thanks ,Terry Allison 724 462 6444

11-15-2014, 07:26 PM	#1
MANSRACING Junior Member Join Date: Jan 2004 Posts: 25 Likes: 13 Liked 10 Times in 4 Posts	Comp/Super Stock Engine Parts SBC CNC Bowtie Block: 4.030 Bore, 55mm babbit cam bearings, 4-bolt billet caps, Jesel Key-lifter bushings, all machine work done by Weston Machine, Fresh hone $2,500 SOLD Bryant Crankshaft: 2.980" Stroke, Honda rod journals, 283 Main journals, MINT condition $1,600 . Bullet Cam: 55mm, record setting SS/CS camshaft $250 Pistons, Rods, Pins: BME 4.029 Bore, Rebco Lightened, .7mm ring grooves. GRP Aluminum 6.00" Long, Honda journal, .927 Pin, PPP Casidium coated Titanium wrist Pins .927" diameter x 2.484" Long $500 Calico Coated Bearings: 350 Block journal to 283 crank journal p/n MS1110H $150 Package deal for everything ABOVE to build SS/CS legal shortblock:. $4,600.00 Jesel Keyway Lifters: .937" diameter, .850" diameter wheel, all +.150" Offset $500 SOLD Dart Iron SBC Castings: SS/CS Approved, brand new in the box set of heads ready for porting. Special ordered with Ductile Iron Exhaust seats, and 5/16" guides $800 for the pair BRE 750cfm SS/BS-CS Legal 4150 Holley Carb $750 Richmond 9" Ford Gear Sets, Small Pinion on each: 6.20 Pro Gear $100 SOLD 6.33 NEW $150 6.50 Pro, 2 Runs $100 SOLD See RacingJunk Ad #182325386 for photos Call Randy @ 612.306.5387 with any questions Last edited by MANSRACING; 12-09-2014 at 07:10 PM. Reason: sold some parts,entered wrong info