|
05-30-2018, 01:38 PM | #1 |
Senior Member
Join Date: Feb 2009
Posts: 925
Likes: 328
Liked 160 Times in 74 Posts
|
front wheels
what is the norm in front wheel width... cobalt/cavilier/grand am GT car? tks.
|
05-30-2018, 05:51 PM | #2 |
Senior Member
Join Date: Sep 2016
Posts: 841
Likes: 150
Liked 277 Times in 152 Posts
|
Re: front wheels
Never owned a front wheel drive converted GT SS car, but I think it's safe to say 3.5" on the wheel width. Also, there are two common backspace options.
|
05-31-2018, 12:03 PM | #3 |
Member
Join Date: Jun 2010
Location: VA
Posts: 229
Likes: 23
Liked 21 Times in 13 Posts
|
Re: front wheels
What are the common backspace sizes ?
__________________
Brian Carpenter Stock 1358 |
05-31-2018, 01:42 PM | #4 |
Guest
Posts: n/a
|
Re: front wheels
BS varies from company to company and many are available special order to fit your needs but if I'm not mistaken most 3.5" wheels come in either 1.75" or 2.25" BS. IIRC the 1.75" BS moves the wheel out more towards the outside of the inner fender and the 2.25" will "tuck" the wheel into the inner fender further. I've been trying to find front wheels for our '72 Chevelle and this is what I'm finding. If I'm not correct hopefully someone will step in with the right information.
Scott |
05-31-2018, 07:03 PM | #5 |
Member
Join Date: Jun 2010
Location: VA
Posts: 229
Likes: 23
Liked 21 Times in 13 Posts
|
Re: front wheels
Thanks. I was looking at holeshot wheels. On the 15x4 they offer 7/8" thru 2 7/8" offsets. Didn't see a 15x3.5 in the style I was interested in. I wasn't sure what offset I needed and don't want to order them twice.
__________________
Brian Carpenter Stock 1358 Last edited by GallopinGhost; 05-31-2018 at 08:10 PM. |
06-01-2018, 10:42 AM | #6 |
Guest
Posts: n/a
|
Re: front wheels
Give them a call and see what they day. IMHO Holeshot makes a great wheel and they have excellent customer service. I have had two sets on Holestars on two different '95 Impala SS's that I've owned. With a 4" IIRC the BS would be 1 & 7/8" but they could be able to tell you. That would put the wheel out more which is a personal thing but the look I like. If you want it centered more in the inner fender it would 2 & 7/8".
|
06-01-2018, 11:19 AM | #7 |
Member
Join Date: Jun 2010
Location: VA
Posts: 229
Likes: 23
Liked 21 Times in 13 Posts
|
Re: front wheels
Holeshot does seem to be a good value. I'll give them a call, as they should know. thanks
__________________
Brian Carpenter Stock 1358 |
|
|