mod motor mustang stocker??

wesley montgomery · 11-04-2008, 05:13 PM

Does any body run a 99-04 mustang in stock or super stock with the 4.6 mod motor?? I am interested in seeing if one of these cars would be a viable combination in stock or super stock

Bill Harris · 11-04-2008, 05:25 PM

Bret Velde runs an 03 (I think) in A/S. It's the 4.6L supercharged rated at 390 HP.

wesley montgomery · 11-04-2008, 05:35 PM

thank you, do you know if anyone runs a n/a 2-v engine??

greg fulk · 11-04-2008, 06:07 PM

Rob Goins runs a 98 2 valve engine in stock

Fred Popov · 11-04-2008, 08:18 PM

I have not seen any 99 to 04 2V Mustang in Stock Eliminator. I think that a lot of racers are afraid to try to build a race car out of the Modular motor. The 2v modular heads don't flow that well, even the PI heads (99-04) NHRA also doesn't have the specs correct for that engine either. The year 99 valve lift is listed correctly at 505/534 but they messed up the 00 to 04. (280/295) They should be the same. If I were to build one I would build a 01 or later because they have a little more compression and the same factory horsepower rating.

wesley montgomery · 11-04-2008, 08:20 PM

thanks for all the info, maybe i should rethink using that car as a base

Fred Popov · 11-05-2008, 09:35 AM

Yes it is the 8.8" solid axle in the Mach 1. That was a bad brain fart ...The 99 and up Cobras came with the IRS.
MM&FF did an article on a completely stock Mach 1 and it ran 13.13-seconds at 105.5.

jeff conley · 11-05-2008, 11:32 AM

I own a 04 Mach 1 with a manual trans 4.56 gear and a real good tune and it runs 12.20's on drag radials all day no other engine mods and without headers. The potential of the 4 valve modular is there wish I had the $$$ to show you guys. To check out other fast Modular style race cars go to www.nmradigital.com.

http://www.modularfords.com/forums/s...ock+eliminator

Chris1529 · 11-05-2008, 11:59 AM

The 03 Mach 1 is the only Mach 1 listed in the guide right now. motor is rated at 320 hp by NHRA.

in E/S, the index is 11.95 @ 3370#
D/S 11.80 @ 3210#
F/S 12.10 @3530#
C/FI same as E/S

what do these cars actually weigh? guide shipping weight is 3210#

greg fulk · 11-05-2008, 12:06 PM

Chris I'd say that's light...I think they would make a good "pure stock" car though. would fit C/PS & D/PS with indexs of 12.75/8.30 &13.10/8.50

11-04-2008, 05:13 PM	#1
wesley montgomery Junior Member Join Date: Apr 2005 Posts: 7 Likes: 0 Liked 0 Times in 0 Posts	mod motor mustang stocker?? Does any body run a 99-04 mustang in stock or super stock with the 4.6 mod motor?? I am interested in seeing if one of these cars would be a viable combination in stock or super stock

11-04-2008, 05:25 PM	#2
Bill Harris Member Join Date: Mar 2002 Location: Ooltewah, TN Posts: 421 Likes: 13 Liked 26 Times in 13 Posts	Re: mod motor mustang stocker?? Bret Velde runs an 03 (I think) in A/S. It's the 4.6L supercharged rated at 390 HP. __________________ Bill Harris ex 2172 STK ex 2272 S/S

11-04-2008, 05:35 PM	#3
wesley montgomery Junior Member Join Date: Apr 2005 Posts: 7 Likes: 0 Liked 0 Times in 0 Posts	Re: mod motor mustang stocker?? thank you, do you know if anyone runs a n/a 2-v engine??

11-04-2008, 06:07 PM	#4
greg fulk VIP Member Join Date: Jan 2003 Location: jackson Posts: 1,165 Likes: 0 Liked 5 Times in 3 Posts	Re: mod motor mustang stocker?? Rob Goins runs a 98 2 valve engine in stock __________________ Greg Fulk 308 308X P/SA "ALL AMERICAN"

11-04-2008, 08:18 PM	#5
Fred Popov Junior Member Join Date: Sep 2007 Location: Chesapeake, VA Posts: 64 Likes: 0 Liked 0 Times in 0 Posts	Re: mod motor mustang stocker?? I have not seen any 99 to 04 2V Mustang in Stock Eliminator. I think that a lot of racers are afraid to try to build a race car out of the Modular motor. The 2v modular heads don't flow that well, even the PI heads (99-04) NHRA also doesn't have the specs correct for that engine either. The year 99 valve lift is listed correctly at 505/534 but they messed up the 00 to 04. (280/295) They should be the same. If I were to build one I would build a 01 or later because they have a little more compression and the same factory horsepower rating.

11-04-2008, 08:20 PM	#6
wesley montgomery Junior Member Join Date: Apr 2005 Posts: 7 Likes: 0 Liked 0 Times in 0 Posts	Re: mod motor mustang stocker?? thanks for all the info, maybe i should rethink using that car as a base

11-05-2008, 09:35 AM	#7
Fred Popov Junior Member Join Date: Sep 2007 Location: Chesapeake, VA Posts: 64 Likes: 0 Liked 0 Times in 0 Posts	Re: mod motor mustang stocker?? Yes it is the 8.8" solid axle in the Mach 1. That was a bad brain fart ...The 99 and up Cobras came with the IRS. MM&FF did an article on a completely stock Mach 1 and it ran 13.13-seconds at 105.5.

11-05-2008, 11:32 AM	#8
jeff conley Junior Member Join Date: Nov 2003 Location: indiana Posts: 92 Likes: 0 Liked 0 Times in 0 Posts	Re: mod motor mustang stocker?? I own a 04 Mach 1 with a manual trans 4.56 gear and a real good tune and it runs 12.20's on drag radials all day no other engine mods and without headers. The potential of the 4 valve modular is there wish I had the $$$ to show you guys. To check out other fast Modular style race cars go to www.nmradigital.com. http://www.modularfords.com/forums/s...ock+eliminator __________________ Operations Manager/Race Director Lucas Oil Raceway @ Indy Last edited by jeff conley; 11-05-2008 at 11:37 AM.

11-05-2008, 11:59 AM	#9
Chris1529 VIP Member Join Date: Dec 2006 Location: West Virginia Posts: 1,366 Likes: 6 Liked 70 Times in 29 Posts	Re: mod motor mustang stocker?? The 03 Mach 1 is the only Mach 1 listed in the guide right now. motor is rated at 320 hp by NHRA. in E/S, the index is 11.95 @ 3370# D/S 11.80 @ 3210# F/S 12.10 @3530# C/FI same as E/S what do these cars actually weigh? guide shipping weight is 3210# __________________ Chris Bowman The Mountain State Mustang 1984 Mustang GT350

11-05-2008, 12:06 PM	#10
greg fulk VIP Member Join Date: Jan 2003 Location: jackson Posts: 1,165 Likes: 0 Liked 5 Times in 3 Posts	Re: mod motor mustang stocker?? Chris I'd say that's light...I think they would make a good "pure stock" car though. would fit C/PS & D/PS with indexs of 12.75/8.30 &13.10/8.50 __________________ Greg Fulk 308 308X P/SA "ALL AMERICAN" Last edited by greg fulk; 11-05-2008 at 12:10 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode