|
![]() |
#1 |
Junior Member
Join Date: Mar 2010
Location: San Antonio, TX
Posts: 18
Likes: 0
Liked 18 Times in 2 Posts
|
![]()
Complete 289 SS engine
385lb-ft @ 5900rpm 479hp @7300rpm Oct 2013 - 289 Mexico Block (used and freshened) - Zero balance rotating assembly steel crank +.003 stroke .040 under main bearings (used and freshened - Shot peened, polished rods .040 under rod bearings (used and freshened) - JE pistons .070 over with new Dykes two ring set (used and freshened) - New roller timing chain set - New Milodon oil pan - New Melling oil pump and pick up - New zero balanced flexplate sfi certified - ATI damper zero balanced - CSI waterpump (used) - New ARP flywheel bolts - New ARP head bolts - Comp Cam full roller solid cam lifters (used) - Comp cam (used) - Edelbrock Victor Jr intake (used) - 1 set of Kip Martin prepared heads (iron used) - I set of Kip Martin valve covers (used) - 1 new set of Jesel shaft rockers, shafts, stands and hardware. - New Meziere electric water pumps 289 Parts - 1 set of Jimmy Bridges prepared Super Stock 289 heads complete (iron used) - 9”Ford ring and pinion high performance competition 6.33/1 with 77 runs - US Gear High Performance Competition Gear Set 6.66/1 with 53 passes - C4 Stock Eliminator JPT race transmission with Bellhousing. Built for low friction with lightweight components. 2.75 first gear - Mark William 35 spline gun drilled lightened axles. 21.5” long and 23.625” long, 5 x 4.5 BC new Last edited by dlux; 02-02-2020 at 07:17 PM. |
![]() |
![]() |
|
|