426 Hemi Display Engine

[John Duzac]

I need some help with a project I am currently putting together. A close friend wants me to build a 426 Hemi Display engine for his car collection. I am looking for the following engine parts:

I need a 426 Hemi Block. This Block can be destroyed internally, as it will never run again. No pistons, rods or any internal part will be installed.

I need a crank shaft. I’m told a 440 crank will work?
I would like to find an old cross ram intake manifold which can be fitted with new carbs. That’s about the only thing on this Display engine that will be functional.

I have tentatively located a set of crashed heads from a SS/AH racer. Again, no one will ever look at the technology of another racer. This I promise!

I need Stock type valve covers. Spark plug tubes.

I have a stock oil pan, timing cover, oil pump and water pump.

Any help on the above listed parts will be appreciated. I’m not trying to get these parts for nothing.

John Duzac
504-259-5935

[Andys dad]

Originally Posted by John Duzac

I need some help with a project I am currently putting together. A close friend wants me to build a 426 Hemi Display engine for his car collection. I am looking for the following engine parts:

I need a 426 Hemi Block. This Block can be destroyed internally, as it will never run again. No pistons, rods or any internal part will be installed.

I need a crank shaft. I’m told a 440 crank will work?
I would like to find an old cross ram intake manifold which can be fitted with new carbs. That’s about the only thing on this Display engine that will be functional.

I have tentatively located a set of crashed heads from a SS/AH racer. Again, no one will ever look at the technology of another racer. This I promise!

I need Stock type valve covers. Spark plug tubes.

I have a stock oil pan, timing cover, oil pump and water pump.

Any help on the above listed parts will be appreciated. I’m not trying to get these parts for nothing.

John Duzac
504-259-5935

Bob Lambeck has older hemi parts his # is 208-250-8005

[Albert Lee]

Long ago I planned the same thing but have since abandoned the project. I have a block, crank, piston, rods, and heads. All cheap! Will separate.

Al Corda 612.963.4540 text/cell - NO pm's please

[Julie Jordan]

Originally Posted by John Duzac

I need some help with a project I am currently putting together. A close friend wants me to build a 426 Hemi Display engine for his car collection. I am looking for the following engine parts:

I need a 426 Hemi Block. This Block can be destroyed internally, as it will never run again. No pistons, rods or any internal part will be installed.

I need a crank shaft. I’m told a 440 crank will work?
I would like to find an old cross ram intake manifold which can be fitted with new carbs. That’s about the only thing on this Display engine that will be functional.

I have tentatively located a set of crashed heads from a SS/AH racer. Again, no one will ever look at the technology of another racer. This I promise!

I need Stock type valve covers. Spark plug tubes.

I have a stock oil pan, timing cover, oil pump and water pump.

Any help on the above listed parts will be appreciated. I’m not trying to get these parts for nothing.

John Duzac
504-259-5935

We have some old parts. Contact Jared @ 209-765-9718.

[John Duzac]

Originally Posted by Julie Jordan

We have some old parts. Contact Jared @ 209-765-9718.

Julie, thanks for your reply. I have received many calls about the Hemi Parts. I will call Monday.

[Spyphish]

Unfortunately I have you a set of heads. Deck height classified so good luck and mum is the word. Valdez

[Bob Bender]

Call Dave Collette @ 443-807-1569, he has alot if stuff.

[John Duzac]

Originally Posted by Spyphish

Unfortunately I have you a set of heads. Deck height classified so good luck and mum is the word. Valdez

Yes Spyphish, mum has always been the word. I need some parts as discussed. I have had a lot of responce from guys that have damaged parts. This Display engine will never run and only for people to view. No one will look at the parts, so racer’s technology will be protected. This is a promise! Besides that, who would know where the parts came from. It’s on a need to know basis and no one needs to know.

I will call you next week.
Thanks...